Grindmaster 835, 890, 810, 875 Cleaning Instructions, Lubrication, Model, Figure B, Page

GRIND CAP (ASSEMBLED)

FEEDWORM & ROTARY BURR

SHEAR DRIVE

GRIND HEAD

SHEAR DISC

	SHEAR COVER
SCREW, 5/16 X 1” LG

Model 890

GRINDGRIND HEAD

FEEDWORMFEED &&ROTARYROTARYBURRBURR

GRIND CAP (ASSEMBLED) GRIND CAP (ASSEMBLED)

SCREW,S 5/16/16-18-18XX1"LG1” LG

ROLL PINI

SHEARSH COVERVER

Figure B

Cleaning Instructions

The outside of machine can be cleaned with a damp cloth or common household polishing wax. See

Shear Disc Replacement section in this manual for instructions on assembling and disassembling the grinder parts. All parts that are in contact with food must be washed with warm soapy water, rinsed,

sanitized and air-dried. Note: The person cleaning the parts should do so with clean hands. Before reassem- bling, wipe the motor shaft with 2 or 3 drops of common household cooking oil in the area of the feedworm engagement to make the assembly easier.

Lubrication

All bearings have been oiled for life. No further oiling is necessary.

Page 4 Grindmaster Corporation 800 Series Coffee Grinders