Aligning the Bracket, Bracket Orientation

2 Aligning the Bracket

Figure 2-1 “Bracket Orientation” shows the correct orientation of the cable management bracket which you must install before connecting the cables to the InfiniBand switch module. During the cabling procedure, the bracket provides strain relief for the InfiniBand ports, and maintains the correct minimum cable bend radius.

Figure 2-1 Bracket Orientation

Callout 1 shows the bracket's mounting hook, installed in one of the square holes in the left rear rack column. The actual mounting locations for a bracket are relevant to the location of the blades enclosure in the rack, and must align with the switch module installed in the c-Class blade enclosure. Figure 2-2identifies relative mount locations.

Figure 2-2 Relative Mounting Locations for a Bracket

U10

The callouts in Figure 2-2identify the following features:

1The U location that aligns with the top of the blades enclosure. Each enclosure us 10U high.

2Filled squares – One of three potential cutouts (mounting holes) where you mount the bracket's hook.

3Circled squares – One of three potential cutouts where you locate a fastener.

Use the following procedure to determine the actual mounting locations for brackets:

1.Determine which of the blades chassis bays contain the InfiniBand switch modules. (There might be more than one InfiniBand switch module in some configurations).

2.Determine the rack U location that aligns with the top of the blades enclosure.

3.Using a pen or masking tape, mark the mount locations defined in Table 2-1.

5991-6764 specifications

The HP 5991-6764 is a highly regarded accessory in the realm of printing technology, specifically designed to enhance the functionality and efficiency of HP printers. This accessory is primarily focused on maintaining the quality of printed documents and extends the lifecycle of the printers themselves.

One of the main features of the HP 5991-6764 is its capacity to improve print quality. It effectively filters out impurities from the ink, ensuring that every print job retains sharpness and vibrancy. This is particularly valuable for businesses and individuals who rely on high-quality prints for presentations, marketing materials, or professional documentation.

In terms of technology, the HP 5991-6764 utilizes advanced filtration systems that are engineered to capture microscopic particles that could potentially disrupt the printing process. This not only helps in maintaining the integrity of the printed output but also aids in preventing ink clogging, a common issue that can lead to costly downtime and maintenance.

Another characteristic of the HP 5991-6764 is its user-friendly installation process. Designed with practicality in mind, the accessory seamlessly integrates with a wide range of HP printers, making it an ideal choice for users looking to improve their printing setup without extensive modifications. This compatibility ensures that both home users and corporate environments can benefit from its features.

Durability is also a key characteristic of the HP 5991-6764. Crafted from high-quality materials, this accessory is built to withstand the rigors of daily printing tasks. Its robust design helps to minimize wear and tear, thereby reducing the frequency of replacements and ensuring consistent performance over time.

Lastly, the HP 5991-6764 is backed by comprehensive support from HP, including customer service and warranty options. This commitment to quality and customer satisfaction makes it a reliable choice for anyone looking to enhance their printing experience.

In summary, the HP 5991-6764 is an essential accessory for HP printers, offering improved print quality, advanced filtration technology, easy compatibility, durable construction, and extensive support. These attributes combine to provide users with a dependable solution that meets their printing needs efficiently.