HP 3C590-TPO manual Client for Microsoft Networks Client for NetWare Networks

Page 30

4 Connecting to a Windows NT Server 4.0

Windows 95 SR2

10In the “Network” dialog box , click on the “Add” button .

11In the “Select Network Component Type” dialog box, highlight “Adapter” then click on “Add.”

12Click on “Have Disk” in the “Select Network adapters” dialog box.

13Insert the 3COM Software “Etherlink 3C509-B Ethernet Drivers Ver. 5.0” disk into the floppy drive.

14With the Path set to “A:\” in the “Install From Disk” dialog box click “OK”. (If you have an HP pre-loaded HDD, set the path statement to “C:\LANDRV\3C509B\”)

15Select the “3Com Etherlink III ISA (3C509/3C509B) in ISA mode” and click “OK.”

16Accept the default Network Protocols as seen below, and click on “OK.” (If you do not have the required information, contact your network administrator)

17Client for Microsoft Networks Client for NetWare Networks

3Com EtherLink III ISA (3C509/3C509b) IPX/SPX -compatible Protocol NetBEUI

18In the configuration folder, click on “Add”, then click “Protocol” and hit enter.

19Under “Manufacturers:” high light “Microsoft”, and under “Network Protocols:” high light “TCP/IP” and hit enter.

20In the “Network” dialog box, click on the “Identification” folder and specify your Computer Name, Workgroup, and Computer Description and click on “OK.” (If you do not have the required information, contact your network administrator)

21Set the default configuration to the desired I/O (300) and hit enter.

22When prompted, specify the path to your Windows 95 files. (If you have an HP preloaded HDD, set the path to “C:\MASTERS\WIN95\SYSTEM\CABS\”)

23To complete the installation, select “Yes” to restart your computer.

Image 30
Contents Etherlink III PCI Network Interface Card 10BT 3C590-TPO Page Connecting to a Netware 3.12 Server \NWCLIENT YES Windows 95 SR2 Requirements Connecting to a Netware 3.12 Server Windows 95 SR2 Connecting to a Netware 4.11 Server \WINDOWS Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Netware 4.11 Server Windows 95 SR2 Connecting to a Windows NT Server Connecting to a Windows NT Server Windows for Workgroups Ver Connecting to a Windows NT Server Windows for Workgroups Ver Connecting to a Windows NT Server Windows for Workgroups Ver HP Vectra with Windows 95 SR2 Connecting to a Windows NT Server 3.51 Windows 95 SR2 Windows NT Workstation Version Requirements Page Page Page Windows NT Workstation Requirements Page Connecting to a Windows NT Server Windows NT Workstation Page Windows for Workgroups Ver Page Connecting to a Windows NT Server Windows for Workgroups Ver Page Windows 95 SR2 Requirements Client for Microsoft Networks Client for NetWare Networks Windows NT Workstation Version Requirements Page Page Page Windows NT Workstation Requirements Connecting to a Windows NT Server Windows NT Workstation Connecting to a Windows NT Server Windows NT Workstation Connecting to a Windows NT Server Windows NT Workstation Page Version Number Lans PCI Rev.1