HP mt40 Mobile manual Configuring HP Velocity using Group Policy

HP Velocity group policy Configuring HP Velocity using Group Policy

Configuring HP Velocity using Group Policy

This section provides instructions on how to add the Administrative Template to the GPO and update the HP Velocity configuration using the Group Policy Editor.

Adding the HP Velocity Administrative Template to a GPO

Choose the Group Policy Editor for the GPO to be edited:

•For local group policy administration, use gpedit.msc.

•For domain group policy administration, use gpmc.msc and select the applicable GPO.

To add the HP Velocity Group Policy Administrative Template to a GPO:

1. Open the appropriate Group Policy Editor (Figure 13).

Figure 13. Adding an Administrative Template

2.Expand Computer Configuration, and navigate to the Administrative Templates folder.

3.Right-clickAdministrative Templates.

4.Click Add/Remove Templates.

5.Click Add.

6.Browse for hp_velocity_configuration_REL#-R#.adm, where REL# is the software release number and R# is the revision number of the template that matches the release number of the HP Velocity install.

7.Click Close.

The HP Velocity Group Policy Administrative Template has been applied to the GPO.

HP Velocity Server Side Deployment Guide 27