Using the Management Application | Configuration | |||
|
|
|
| |
|
|
|
| |
| Configuration option | Description |
| |
|
|
|
| |
| Burst Loss Protection | Set BLP to protect against correlated loss in the network. |
| |
|
| Available values are: |
| |
|
| • | Off: Disables BLP for correlated loss. |
|
|
| • | On: Enables BLP for correlated loss. |
|
|
| • | Auto: Allows HP Velocity to determine if BLP is required and | |
|
|
| automatically turn the feature on if required. Auto is the default value. | |
|
| NOTE: BLP might degrade performance for highly | ||
|
| applications. |
| |
|
|
| ||
| BLP Buffer | Set the amount of packet buffering in milliseconds that HP Velocity is | ||
|
| allowed to use when protecting against bursty or correlated loss. | ||
|
| Available values range from 10 to 100 ms in increments of 10 ms. The | ||
|
| default value is 20 ms. |
| |
|
|
|
|
|
Configuring LiveTCP - Latency Mitigation
HP Velocity LiveTCP - Latency Mitigation optimizes TCP throughput and provides latency mitigation for RDP, RGS, and ICA protocols. Table 23 describes the configurable latency mitigation parameters.
Figure 31. LiveTCP - Latency Mitigation configuration dialog
HP Velocity Server Side Deployment Guide | 69 |