HP ep7100 manual Installing permanently, Installing the projector, Installing on a table

Page 47

5

Installing permanently

Installing the projector

Installing on a table

This installation is covered in detail in Chapter 1. See “Setting up the projector” on page 15 for more information.

Installing on the ceiling

ÅWARNING: To minimize the risk of injury from improperly installed equipment, it is recommended that a professional installer performs the ceiling installation.

1.Attach the projector to the ceiling using an HP L1733A ceiling mount kit. The base of the projector must by removed when it is attached to the ceiling mount. See the installation instructions provided with the ceiling mount kit.

2.After the projector is mounted on the ceiling, adjust the projector settings to match this setup. Press menu, select Setup > Projector position, and select Front Ceiling from the drop-downlist.

Installing for rear projection

1.Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for rear projection.

See “Setting up the projector” on page 15 or “Installing on the ceiling” on page 47 for more instructions.

2.Press menu and select Setup > Projector position. Then select Rear Table or Rear Ceiling.

User’s Guide

47

Image 47

Contents HP ep7100 Series Home Cinema Digital Projector First Edition July Contents Showing video Index Contents Safety precautions Setting upWhat’s in the box? Identifying the contents of the box Identifying major components Identifying common featuresProjector at a glance Identifying the projector buttons and lights Projector buttons and lightsIdentifying back panel components Back panelRemote control Identifying features of the remote control AccessoriesPlanning your layout Setting up the projectorSetting up Image size diagonal Image size width Distance lens to screen Connecting power Connecting a video source Connecting a component-video source Connecting an S-video source Connecting a composite-video source Connecting a DVI source Connecting a Scart source Connecting a sound system Connecting several video sources Connecting a computer Turning the projector on Turning the projector on and offMoving the projector Turning the projector offAiming the projector Making basic adjustmentsSelecting a source Adjusting the focus and zoom Press menu and go to Picture Customize picture mode Changing the picture modeAdjusting the shape of the picture Adjusting the volume Adjusting a slanted pictureShowing a computer screen Showing videoShowing the video source Hiding or showing the pictureShowing video Adjusting the sound Adjusting the projectorAdjusting the picture and sound Adjusting the pictureChanging settings using the on-screen menu Using the on-screen menuAdjusting the projector setup Picture menu Input menuPicture menu Input menuSource or each viewing environment. You can also Help menu Setup menuSound menu Adjusting the projector Getting the projector status Cleaning the projector lensMaintaining the projector Replacing the lamp module requires special consideration Replacing the lamp moduleReplacing the battery in the remote control Maintaining the projector Installing on the ceiling Installing permanentlyInstalling the projector Installing on a tableSerial connections Connecting to a room controllerExamples of room controller commands Request *BRT=65CR Notification Room controller commandsCspc Hide Lhrs Shdn Menu Installing permanently If both red warning lights are blinking Fixing problemsTroubleshooting suggestions If the red temperature light is on or blinkingPicture problems Start-up problemsIf the image has slanted sides If the image is out of focusIf an upside-down or reversed image is displayed If the image is too small or too largeIf the projected colors seem completely wrong If the image is stretchedIf the projected colors seem slightly wrong If no sound is coming out of the projector Sound problemsIf a computer display is projected with low resolution If the image disappears from the computer screenRemote control problems Interruption problemsPress menu and go to Help Diagnostics Testing the projectorFixing problems Contacting HP support Support and warrantySupport Americas Obtaining HP repair Limited warrantyHP digital projector limited warranty statement Extent of limited warrantyLimitations of liability Limitations of warrantyLocal law Support and warranty Reference SpecificationsProjector specifications Operating Compatibility Resolution Refresh rates Hz Analog Video mode compatibilityRegulatory information Safety informationLED safety Mercury safetyConnections to peripheral devices CanadaJapan Korea International Declaration of conformity Reference Index Index Index Index Page 5990-3663 Mercury Safety

Related manuals

Manual 84 pages 58.75 Kb