4 GB

Start-up Guide

Before Use

To check the accessories
Mains lead (1)
Remote RM-ED011 (1)
Size AA batteries (R6 type) (2)
Stand (1) and screws for stand (4)
(KDL-46W4500/KDL-40W4500 only)
To insert batteries into the remote
~
Observe the correct polarity when inserting
batteries.
Do not use different types of batteries together or
mix old and new batteries.
Dispose of batteries in an environmentally
friendly way. Certain regions may regulate the
disposal of batteries. Please consult your local
authority.
Handle the remote with care. Do not drop or step
on it, or spill liquid of any kind onto it.
Do not place the remote in a location near a heat
source, a place subject to direct sunlight, or a
damp room.

1: Attaching the stand

(for KDL-46W4500/

KDL-40W4500)

1Open the carton box and take out the stand
and the screws.
2Place the TV set on the stand. Take care
not to interfere with cables.
3Fix the TV to the stand according to the
arrow marks that guide the screw holes
using the supplied screws.
~
If using an electric screwdriver, set the tightening
torque at approximately 1.5 N·m {15 kgf·cm}.
Push and lift the cover to open.