HP LC3772N 37 inch, LC3272N 32 inch, LC4276N 42 inch Changing the View by Using the Aspect Button

Changing the View by

Using the Aspect Button

Press the Aspect button on the remote control to select an option for the dimensions of the TV picture image. The options that are available for selection depend on the current input source.

Input	TV image (Aspect)
signal	4:3	16:9	Zoom1	Zoom2	Panorama
4:3
16:9					Not available

The Aspect options are:

■Auto automatically shows the correct aspect ratio, based on the content.

■16:9 shows widescreen TV in its recorded format, or stretches a 4:3 ratio image to fit the screen with no center aspect correction.

■4:3 shows the standard 4:3 ratio image in the center of the TV, with dark bars on the left and right of the screen, or horizontally shrinks widescreen pictures.

■Zoom1 stretches the image vertically. Suitable for stretching widescreen DVD movies to reduce or eliminate horizontal dark stripes at the top and bottom of the screen.

■Zoom2 stretches the image both vertically and horizontally, and may clip the top, bottom, and sides of the image.

■Panorama stretches the picture horizontally, if necessary, to fill the screen; the center of the screen has aspect correction. Suitable for stretching a normal 4:3 ratio image to fill the screen.

n

When the input source is HDMI, the Panorama mode is not available. When the input source is PC, the Zoom1, Zoom2, and Panorama modes are not available.

n

Some stations transmit Standard-definition programming directly in 16:9 aspect ratio so that the image has embedded dark side bars. For that type of input signal, the Panorama mode is not available, and the Zoom1 and Zoom2 modes do not eliminate the side bars.

Use the onscreen display Picture menu option Aspect Ratio to set the default aspect; see “Using the Picture Menu” on page 30.

26HP HDTV User’s Guide