Rear panel components
| Component | Description |
(1) | Power connector 1 light | On: The docking station is on. |
(2) | Power connector 1 | Connects the docking station to a Smart AC |
|
| adapter. |
(3) | Power connector 2 light | On: The docking station is on. |
(4) | Power connector 2 | Connects the docking station to a standard AC |
|
| adapter. |
(5) | USB ports (4) | Connect optional USB devices. |
|
| Power is always on to all USB ports when the |
|
| docking station is connected to AC power. |
|
| NOTE: There are 2 additional USB ports on the |
|
| right panel of the docking station. |
(6) | Connects an Ethernet network cable. | |
(7) | External monitor port | Connects an optional external VGA monitor or |
|
| projector. |
(8) | S/PDIF (Sony/Philips Digital Interface) | Connects an optional compatible audio/video |
| digital audio jack | receiver through a digital coaxial cable (purchased |
|
| separately). |
(9) | Hard drive power connector | Connects an optional HP Personal Media Drive to |
|
| additional external AC power, if desired. |
4 Chapter 1 Getting started | ENWW |
Antenna House XSL Formatter (Evaluation) http://www.antennahouse.com/