HP 4310S manual HP ProBook 4310s Notebook PC Memory, Upgrades, Slots Up to 1024 MB

QuickSpecs

HP ProBook 4310s Notebook PC

Memory

1066/1333 MHz DDR3 SDRAM

Two DIMM slots supporting dual channel memory

DIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB

Standard Memory	1024	MB (1024	MB x 1)
	2048	MB (2048 MB x 1 or 1024 MB x 2)
	3072	MB (2048	MB x 1024 MB)
	4096	MB (2048	MB x 2)
Optional Memory	Support for up to 8192 MB of memory with the installation of optional SDRAM memory kits. Both memory
Upgrades	slots are user accessible. Please refer to the Hardware and Software Guide for installation procedures.
	Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory
	slots.
Up to			Slot 1	Slot 2
1024 MB			1024 MB	Empty
2048 MB			1024 MB	1024 MB
3072 MB			2048 MB	1024 MB
4096 MB			2048 MB	2048 MB
8192 MB			4096 MB	4096 MB

NOTE: This chart does not represent all possible memory configurations. Full availability of 4 GB or more of memory requires Windows Vista Business 64-bit or Linux. With Windows 32-bit operating systems, the amount of usable memory is dependent upon your configuration, so that above 3 GB all memory may not be available due to system resource requirements. Due to the non-industry standard nature of some third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed.

Memory Upgrades	HP 1 GB (DDR3 1066/1333 MHz) SODIMM	TBD
	HP 2 GB (DDR3 1066/1333 MHz) SODIMM	TBD
	HP 4 GB (DDR3 1066/1333 MHz) SODIMM	TBD

DA - 13354 Worldwide QuickSpecs — Version 6 — 9.28.2009 Page 12