QuickSpecs
HP ProBook 4310s Notebook PC
Technical Specifications5.
supplier IHV extensions required for Cisco Compatible Extensions support for Microsoft Windows Vista.
Intel WiFi Link 1000 Wireless LAN StandardsIEEE 802.11b
IEEE 802.11g
IEEE 802.11n (draft 2.0)*
| * The specifications for 802.11n draft 2.0 are draft specifications and are |
| not final. If the final specifications differ from the draft specifications, it may |
| affect the ability of the notebook to communicate with other 802.11n WLAN |
| devices. In countries where n draft 2.0 is not allowed, this capability is not |
| enabled. |
Interoperability | |
| Cisco Compatible Extensions Program compliant with Microsoft Windows |
| Vista and XP (details at: http://www.hp.com/go/notebooks/WLAN) |
Frequency Band | 2.4 GHz |
Antenna Structure | 1 transmit; 2 receive (1x2) |
Data Rates | 802.11b: 1, 2, 5.5, 11 Mbps |
| 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
| 802.11n (draft): many possible data rates, ranging from 6 Mbps to 300 |
| Mbps, depending on the combination of Bandwidth, Modulation Coding |
| Scheme, and Guard Interval used, as defined in IEEE 802.11n (draft) |
| specification |
Modulation | Direct Sequence Spread Spectrum |
| DBPSK, DQPSK, CCK, OFDM, BPSK, QPSK, |
Security1 | Authentication: WPA and WPA2, 802.1x (EAP_TLS, TTLS, PEAP, LEAP, EAP- |
| FAST) |
| Authentication Protocols: PAP, CHAP, TLS, GTC, |
| Encryption: 64 and |
| Support for Cisco Security Features (proven compatibility with Cisco Aironet |
| infrastructure products through the Cisco Compatible Extensions Program |
| Version 4) with Microsoft Windows Vista and XP only. |
| Multinational support with frequency bands and channels compliant to local |
| regulations. |
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK | |
Network Architecture | |
Models | Infrastructure (Access Point Required) |
Roaming | IEEE 802.11 compliant roaming between 2.4GHz band Access Points |
Output Power (for CCK | 15 dBm typical |
and OFDM)2 |
|
Power Consumption | Transmit: 1.4 Watts (average, with one spatial streams) |
| Receive: 1.3 Watts (average with two receive chains) |
| Idle mode3: 30 mW (average) |
| Radio off: 20 mW (max) |
Power Management | ACPI compliant power management |
| 802.11 compliant power saving mode |
Receiver Sensitivity4 | 54 Mbps: |
DA - 13354 Worldwide QuickSpecs — Version 6 — 9.28.2009 | Page 29 |