HP C2M21UA, C2M29UA manual Power connector

Power connector

Description	Spare part number
Power connector (includes cable)	640891-001

Before removing the power connector cable, remove the following components:

1.Battery (see Battery on page 30)

2.Service door (see Service door on page 31)

3.Hard drive (see Hard drive on page 32)

4.Optical drive (see Optical drive on page 34)

5.Keyboard (see Keyboard on page 39)

6.Top cover (see Top cover on page 41) Remove the power connector:

1.Turn the computer right-side up, with the right side toward you.

2.Disconnect the power connector cable (1) from the system board.

3.Lift the power connector (2) from the clips built into the base enclosure.

Reverse this procedure to install the power connector.

Component replacement procedures 49