Removal and Replacement Procedures
5.16 Top Cover
Spare Part Number Information
Top cover (includes TouchPad and TouchPad shield) |
|
For use with HP Pavilion zt3000 notebooks | |
For use with HP Compaq nx7000 and | |
Compaq Presario X1000 notebooks |
|
|
|
✎When replacing the top cover, determine if a Bluetooth board is installed in the defective top cover. If a board is installed, remove it from the defective top cover and install it in the replacement top cover. Refer to Section 5.17, “Bluetooth Board,” for instructions on removing and installing a Bluetooth board.
1.Prepare the notebook for disassembly (Section 5.3).
2.Disconnect the wireless antenna cables from the Mini PCI communications board (Section 5.6).
3.Remove the following components:
❏Optical drive (Section 5.8)
❏Keyboard (Section 5.9)
❏Switch cover (Section 5.10)
❏Speaker cover (Section 5.11)
❏Display assembly (Section 5.15)
4.Turn the notebook upside down, with the front facing you.
Maintenance and Service Guide |