Removal and Replacement Procedures
Spare Part Number Information
Hard drives (hard drive cover, shield, and connector included with hard drive and in Miscellaneous Plastics Kits)
|
|
5.Remove the hard drive by following these steps:
a.Turn the notebook upside down, with the front facing you.
b.Remove the two PM2.5×9.5 screws 1 that secure the hard drive to the notebook.
c.Use the notch 2 on the hard drive cover to lift the rear edge of the hard drive up and swing it forward 3.
Removing the Hard Drive
d. Remove the hard drive.
Maintenance and Service Guide |