Hinge assembly
Description | Spare part number |
|
|
Hinge assembly |
|
|
|
Before removing the hinge, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32).
5.Remove the base enclosure (see Base enclosure on page 33.
6.Disconnect the battery cable.
Remove the hinge assembly:
1.Remove the four Phillips PM2.5×5.0 screws (1) that secure the hinge to the dock.
2.Disconnect the cables from each side of the dock (2).
NOTE: When disconnecting the cable from the HDMI board, hold the board in place to disconnect the cable. The board is not secured at this point in the disassembly process.
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts