Power connector
Description | Spare part number |
|
|
Power connector |
|
|
|
Before removing the power connector, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Disconnect the tablet from the keyboard dock (see Releasing the tablet from the keyboard dock on page 32).
5.Remove the base enclosure (see Base enclosure on page 33.
6.Remove the battery (see Battery on page 37.
7.Remove the hinge assembly (see Hinge assembly on page 36.
Remove the power connector:
1.Remove the Phillips PM2.5×5.0 screw (1) that secures the power connector bracket to the dock.
2.Lift the bracket up and out of the dock (2).
3.Remove the power connector (3) from the dock.
Reverse this procedure to install the power connector.
Dock components 43