To test the AC adapter:
1.Shut down the computer.
2.Remove the battery from the computer.
3.Connect the AC adapter to the computer, and then plug it into an AC outlet.
4.Turn on the computer.
●If the power lights turn on, the AC adapter is working properly.
●If the power lights remain off, check the connection from the AC adapter to the computer and the connection from the AC adapter to the AC outlet to make sure the connections are secure.
●If the connections are secure and the power lights remain off, the AC adapter is not functioning and should be replaced.
Contact customer support for information on obtaining a replacement AC power adapter.
HP CoolSense (select models only)
HP CoolSense | automatically detects when the computer is not in a stationary position and |
adjusts performance and fan settings to keep the surface temperature of your computer at the optimum level of comfort.
When HP CoolSense is off, the position of the computer is not detected and the performance and fan options remain at the factory setting. As a result, the surface temperature of the computer may be higher than it would be with HP CoolSense on.
To turn CoolSense off or on, follow these steps:
▲From the Start screen, type cool, select Settings, and then select HP CoolSense.
Refreshing your software content with Intel Smart Connect Technology (select models only)
When the computer is in the Sleep state, Intel® Smart Connect Technology periodically causes the computer to exit Sleep. Smart Connect then updates the content for certain open applications and reinitiates Sleep. As a result, your work is immediately available to you as soon as you exit Sleep.
You do not have to wait while updates are downloaded.
▲To enable this feature or manually adjust the settings, on the Start screen, type smart, and then select then select Intel(R) Smart Connect Technology.
Shutting down (turning off) the computer
CAUTION: Unsaved information is lost when the computer shuts down. Be sure to save your work before shutting down the computer.
The Shut down command closes all open programs, including the operating system, and then turns off the display and computer.
HP CoolSense (select models only) 35