Air2AirTM System
Water. We can’t live without it. And, in many parts of the world, we can barely get enough. The impact on industry is huge. Short water supplies can limit plant production, block industrial growth
and expansion, drive up treatment costs for the water that actually is available, and heavily burden existing infrastructures. Meanwhile, the more usable water an operation demands, the less
Enter SPX Cooling Technologies. Our unique Air2Air water recovery system does what no other cooling technology can: reduce your cooling tower water consumption by up to 30% annually.*
That level of reduction can add up quickly, fueling your productivity and growth while increasing energy efficiency. And Air2Air systems can be used in either new or existing cooling towers.
*Dependent upon system operating conditions and local weather conditions.
Warm moist air is cooled as it flows
Cool ambient air supply to Air2Air condenser packs
Warm, moist air drawn off of
Condensed water recovered or retained in the circulating system
Cooler, mixed air exits cooling tower
Hot water distribution over
Cooling tower
Cool ambient air enters at base of cooling tower
The Air2Air water recovery system allows cooler, ambient air to condense much of the moisture before it exits the tower. The system can be installed on a single cooling tower cell, or on an entire tower, depending on the required water return rate.
And what to do with the water you save? It can be cycled back into the cooling system. Or piped away as a pure water stream for boiler