Moyer Diebel 501-LT, 501-HTN technical manual Troubleshooting con’t

TROUBLESHOOTING

TROUBLESHOOTING (con’t)

CONDITION	CAUSE	SOLUTION
No water in wash well	Opening door prior	Close door. Wait for green cycle light
	to cycle completion	to go out before opening door.
No water in wash tank	Door not latched	Latch door.
after activating the		Wait for wash tank to fill.
ON/FILL switch
Cycle time increases	Incoming water	Raise temperature to 60°C/140°F
with each cycle	temperature is too low	for all machines.

14