Password | Function |
|
|
● Protects access to the computer contents. | |
| ● After this password is set, it must be entered each time |
| you turn on or restart the computer, or exit Hibernation. |
| CAUTION: If you forget your |
| cannot turn on or restart the computer, or exit Hibernation. |
| NOTE: The administrator password can be used in place of |
| the |
| NOTE: A |
| entered, changed, or deleted. |
*For details about each of these passwords, refer to the following topics.
Managing an administrator password
To set, change, or delete this password, follow these steps:
1.Open Setup Utility (BIOS) by turning on or restarting the computer. While the “Press the ESC key for Startup Menu” message is displayed in the
2.Use the arrow keys to select Security > Administrator Password, and then press enter.
●To set an administrator password, type your password in the Enter New Password and Confirm New Password fields, and then press enter.
●To change an administrator password, type your current password in the Enter Current Password field, type a new password in the Enter New Password and Confirm New Password fields, and then press enter.
●To delete an administrator password, type your current password in the Enter Password field, and then press enter 4 times.
3.To save your changes and exit Setup Utility (BIOS), use the arrow keys to select Exit > Exit Saving Changes.
Your changes take effect when the computer restarts.
Entering an administrator password
At the Enter Password prompt, type your administrator password, and then press enter. After 3 unsuccessful attempts to enter the administrator password, you must restart the computer and try again.
46 Chapter 7 Security