HP 8440P manual Standard Memory, Up to Slot, Memory Upgrades

QuickSpecs

HP EliteBook 8440p Notebook PC

Memory

DDR3 PC3-10600 SDRAM (1333 MHz)*

Two SODIMM slots supporting dual-channel memory

SODIMM sizes supported: 1024 MB, 2048 MB, and 4096 MB

Standard Memory	1024 MB (1024 MB x 1)
	2048 MB (2048 MB x 1 or 1024 MB x 2)
	3072 MB (2048 MB + 1024 MB)
	4096 MB (4096 MB x 1 or 2048 MB x 2)
Optional Memory Upgrades Support for up to 8192 MB of memory with the installation of optional DDR3 SDRAM
	memory kits. Both memory slots are user-accessible. Please refer to the Hardware and
	Software Guide for installation procedures. Maximized dual-channel performance requires
	SODIMMs of the same size and speed in both memory slots.
Up to		Slot 1	Slot 2
1024 MB		1024 MB	Empty
2048 MB		2048 MB	Empty
2048 MB		1024 MB	1024 MB
3072 MB		2048 MB	1024 MB
4096 MB		4096 MB	Empty
4096 MB		2048 MB	2048 MB
8192 MB		4096 MB	4096 MB
	* With some processors, memory bus runs at a maximum of 1066 MHz.
	NOTE: This chart does not represent all possible memory configurations. Due to the non-
	industry standard nature of some third-party memory modules, we strongly recommend
	using only HP- branded memory modules to ensure compatibility. If you mix memory
	speeds, the system will perform at the lower memory speed. Full availability of 4 GB or more
	of memory requires a Windows 64-bit operating system or Linux. With Windows 32-bit
	operating systems, the amount of usable memory is dependent upon your configuration, so
	that above 3 GB all memory may not be available due to system resource requirements.
Memory Upgrades	HP 1 GB (DDR3 1333 MHz) SODIMM		AT911AA
	HP 2 GB (DDR3 1333 MHz) SODIMM		AT912AA
	HP 4 GB (DDR3 1333 MHz) SODIMM		AT913AA

DA - 13520 Worldwide QuickSpecs — Version 12 — 5/24/2010 Page 16