QuickSpecs
HP EliteBook 8440p Notebook PC
Technical Specifications
Authentication Protocols: PAP, CHAP, TLS, GTC,
CHAPv2
| Encryption: 64 and |
| Support for Cisco Security Features (proven compatibility with Cisco |
| Aironet infrastructure products through the Cisco Compatible |
| Extensions Program Version 4) with Microsoft Windows Vista and XP |
| only. |
| Multinational support with frequency bands and channels compliant to |
| local regulations. |
Media Access Protocol CSMA/CA (Collision Avoidance) with ACK | |
Network Architecture | |
Models | Infrastructure (Access Point Required) |
Roaming | IEEE 802.11 compliant roaming between 2.4GHz band Access Points |
Output Power (for CCK 17 dBm max and OFDM)2
Power Consumption | Transmit: 2.3 Watts (max, with two spatial streams) | |
| Receive: 1 Watt (max with two spatial streams) | |
| Idle mode3: 35 mW (average) | |
| Radio off: 20 mW (max) |
|
Power Management | ACPI compliant power management | |
| 802.11 compliant power saving mode | |
Receiver Sensitivity4 | 54 Mbps: | |
Antenna Connections | 2 U.FL type connectors, 50 ohm nominal impedance | |
Form Factor | ||
Weight | 0.0075 lb (3.4 g) |
|
Dimensions | 0.12 x 1.06 x 1.18 in (3.1 x 26.8 x 30.0 mm) | |
Operating Voltage | 3.3V +/- 9% |
|
Temperature | Operating | 32° to 176° F (0° to 80° C) |
| ||
Humidity | Operating | 10% to 90% |
| 5% to 90% | |
Altitude | Operating | 0 to 10,000 ft (3,048 m) |
| 0 to 50,000 ft (15,240 m) | |
Configuration Utility5 | Choice of Configuration Utility: | |
| Microsoft Windows XP |
|
Microsoft Windows XP Wireless Network Connection Manager
Intel PROSet for Microsoft Windows XP (required for Cisco
Compatible Extensions support)
Microsoft Windows Vista
Microsoft Windows Vista Wireless Network Connection Manager.
Intel IHV extensions for Windows Vista available to support Cisco
Compatible Extensions.
LED Activity | LED Off - Radio OFF; Solid LED On - Radio ON |
1.Check latest software/driver release for updates on supported security features.
2.Maximum output power may vary by country according to local regulations.
3.In Power Save Polling mode and on battery power.
4.Receiver sensitivity is measured at a packet error rate of 8% for 802.11b (CCK modulation) and a packet error rate of 10% for 802.11a/g (OFDM modulation).
5.WLAN supplier's client utility is required for Cisco Compatible Extensions support with
DA - 13520 Worldwide QuickSpecs — Version 12 — 5/24/2010 | Page 33 |