HP 2540P manual Additional, Information

QuickSpecs

HP EliteBook 2540p Notebook PC

Technical Specifications

	Mercury greater the 5ppm by weight
	Cadmium greater than 10ppm by weight
	The battery type and chemistry used in the product is:
	CR2032 (coin cell), Li-ion
	6-cell high capacity Lithium-Ion battery (optional 8 cell available)
Additional	This product is in compliance with the Restrictions of Hazardous Substances
information:	(RoHS) directive – 2002/95/EC.
	This HP product is designed to comply with the Waste Electrical and
	Electronic Equipment (WEEE) Directive – 2002/96/EC.
	This product is in compliance with California Proposition 65 (State of
	California; Safe Drinking Water and Toxic Enforcement Act of 1986).
	This product is in compliance with the IEEE 1680 (EPEAT) standard at the
	Silver level, see www.epeat.net
	Plastics parts weighing over 25 grams used in the product are marked per
	ISO 11469 and ISO1043.
	This product contains 0.33% post consumer recycled plastic (by wt.)
	This product is greater than 85% recycle-able when properly disposed of at
	end of life.
	Packaging Materials
	External:
	Paper – 97 g
	Internal:
	Polyethylene low density solid – 13 g
	Molded Pulp – 100 g
	Polyethylene low density – 4 g
	The paper packaging material is made from 80% recycled content.
	The Polyethylene low density solid material is made from 100%
	recycled content.
	The Molded Pulp packaging material is made from 80% recycled
	content.
	The Polyethylene low density material is made from 100% recycled
	content.
	HP follows these guidelines to decrease the environmental impact of product
	packaging:
	Eliminate the use of heavy metals such as lead, chromium, mercury
	and cadmium in packaging materials.
	Eliminate the use of ozone-depleting substances (ODS) in packaging
	materials.
	Design packaging materials for ease of disassembly.
	Maximize the use of post-consumer recycled content materials in

DA - 13566 North America — Version 7 — May 11, 2010 Page 35