HP 8710p manual Standard Memory, Up to Slot, Memory Upgrades

QuickSpecs

HP Compaq 8710p Notebook PC

Memory

667-MHz DDR2 SDRAM

Two DIMM slots supporting dual channel memory DIMM sizes supported: 1024 MB, 2048 MB

Standard Memory	1024 MB (1024 MB x 1)
	2048 MB (2048 MB x 1 or 1024 MB x 2)
	4096 MB (2048 MB x 2)

Optional Memory Support for up to 4096 MB of memory with the installation of optional DDR2 SDRAM memory kits.

UpgradesBoth memory slots are user accessible. Please refer to the Hardware and Software Guide for installation procedures. Maximized dual-channel performance requires SODIMMs of the same size and speed in both memory slots.

Up to	Slot 1	Slot 2
1024 MB	1024 MB	Empty
2048 MB	1024 MB	1024 MB
4096 MB	2048 MB	2048 MB

NOTE: This chart does not represent all possible memory configurations. Due to the non-industry standard nature of some third-party memory modules, we strongly recommend using only HP branded memory modules to ensure compatibility. If you mix memory speeds, the system will perform at the lower memory speed. Above 3-GB, all memory may not be available due to system resource requirements.

Memory Upgrades	HP 1024-MB (DDR2 667 MHz) SODIMM	EM994AA
	HP 2048-MB (DDR2 667 MHz) SODIMM	EM995AA

DA - 12716 Europe, Middle East and Africa QuickSpecs — Version 8 — 8.1.2007 Page 13