HP 4320T manual Computer Setup menus

Select	To do this
Boot Options	● Set a Startup Menu delay (in seconds).
	● Set the Express Boot Popup delay in seconds.
	● Enable/disable CD-ROM boot (enabled by default).
	● Enable/disable PXE Internal NIC boot (disabled by
	default).
	● Set the boot order.
Device Configurations	● Enable/disable USB legacy support (enabled by
	default). When enabled, USB legacy support allows the
	following:
	◦	Use of a USB keyboard in Computer Setup even
		when a Windows® operating system is not
		running.
	◦	Startup from bootable USB devices, including a
		hard drive, diskette drive, or optical drive
		connected by a USB port to the computer.

● Enable/disable fan always on while connected to an AC outlet (enabled by default).

● Enable/disable Data Execution Prevention (select models only; enabled by default). When enabled, the processor can disable some virus code execution, which helps to improve computer security.

NOTE: Availability of the options above varies by computer model.

● Enable/disable LAN Power Save (disabled by default).

● Enable/disable Virtualization Technology (select models only; disabled by default).

● Enable/disable Wake on USB (disabled by default).

● Enable/disable Num lk on at boot (disabled by default).

Computer Setup menus 83