HP 4320T manual Computer Setup

Select	To do this
Built-In Device Options	●	Enable/disable the wireless button state (enabled by
		default).
	●	Enable/disable the embedded WLAN device (enabled
		by default).
	●	Enable/disable LAN/WLAN switching (disabled by
		default).
	●	Enable/disable the Network Interface Controller (LAN)
		(enabled by default).
	●	Set the wake on LAN state. Options include the
		following:
		◦	Disabled
		◦	Boot to Network (set by default)
		◦	Follow Boot Order
	●	Enable/disable the optical disc drive (enabled by
		default).
	●	Enable/disable an audio device (enabled by default).
	●	Enable/disable a modem device (enabled by default).
	●	Enable/disable the microphone (enabled by default).
Port Options	NOTE:		All port options are enabled by default.

● Enable/disable the flash media reader. ● Enable/disable the USB port.

CAUTION: Disabling the USB port also disables MultiBay devices and ExpressCard devices on the advanced port replicator.

● Enable/disable the ExpressCard slot. ● Enable/disable the eSATA port.

84 Chapter 5 Computer Setup