HP StorageWorks
IO Accelerator Mezzanine Card Customer Self Repair Instructions
Before you begin
CAUTION:
When handling system components, there is a danger to equipment from electrostatic discharge (ESD). Use proper
•Keep the replacement component in the ESD bag until needed.
•Wear an ESD wrist strap grounded to an unpainted surface of the chassis.
•If an ESD wrist strap is unavailable, touch an unpainted surface of the chassis before handling the component.
•Never touch connector pins.
CAUTION:
Be sure the replacement is available before removing the failed component. Removing a component impacts airflow and cooling within the enclosure.
© Copyright 2009
The information in this document is subject to change without notice. Printed in Singapore.
www.hp.com
Verifying component failure
The drivers and utilities for the IO Accelerator provide several ways to diagnose failure of the IO Accelerator. Check the system log files,
Mezzanine Card
For mezzanine card locations, see the system board components in the Mezzanine Card Users Guide
1.Power down the server blade.
2.Remove the server blade.
3.Remove the access panel.
4.Remove the mezzanine card.
Page 1