Remote Control
You can access all of the DPF’s features, and perform all of the functions by using the remote control. You will be able to perform several functions with the remote control that are not possible with the
Note: Before first time use, pull the plastic tab sticking out of the remote control. It protects the battery and the remote control will not work unless it is removed.
1
2
3
4
5
6
7
8
9
10
11
12
1Start Slideshow
2 Exit or go back | 8 Access Setup screens (Menu) |
3Scroll up
4 | Scroll previous | 9 | Scroll forward |
5 | Play/Pause/Select object | 10 | Scroll down |
6 | Volume adjust higher | 11 | Rotate image |
| or Select object |
|
|
7 | Volume adjust lower | 12 | Enlarge image |
| or |
|
|
Replace the Remote Control Battery
1.Hold the remote control with the buttons facing down.
2.Push and hold the small release tab while pulling the battery tray out.
3.Replace the “CR2025” Lithium battery on the tray with the positive (+) side facing up.
4. Push the tray back in until it clicks into place. | Release tab |
Control Buttons on DPF
You can perform many (but not all) of the DPF functions by using the control buttons located on the
TIP: The instructions throughout this User Guide only reference the use of the remote control. However, if desired, you can use the frame control buttons when these buttons are referenced:
Remote | Frame | Action |
| | Scroll left |
|
|
|
| ENTER | Play/Pause/Select object |
|
|
|
| | Scroll right |
|
|
|
| EXIT | Exit the current display, or go back a screen |
|
|
|
| MENU | Access Setup screens |
|
|
|
6