Using Night Mode
You can use Night Mode to compress large dynamic ranges, resulting in “quieter” explosions and other loud sounds in movies. The Night Mode feature adjusts the dynamic range so that there is less disparity in the noise level of all sounds in a movie (explosions, music, dialogue, and so on).
4While in Dolby Digital or Dolby Digital Stereo mode, press NIGHT MODE to turn Night Mode on. The receiver displays D?=>J. Press NIGHT MODE again to turn it off.
Note: Night Mode is not available for movies using DTS mode, or when the audio is set to PCM mode.
Recording Audio from the Receiver to Digital Audio Equipment
Some DVDs might be encoded with an
other digital equipment) from thejack on the receiver’s back. Use audio/video cables to connect the equipment to TAPE OUT.
Note: To ensure proper recording quality when you make a copy of a DVD/CD via TAPE output, set the front speaker size to <#B7H=;ý(see “Changing the Speaker Size” on Page 13). Set the surround mode to IJ;H;E.
DVD ADVANCED FEATURES
For the advanced features, the receiver’s display screen does not change. The display appears on your television screen.
Using GUI Menu Icons
GUI (Graphic User Interface) menu icons show disc information (for example, title or chapter number, elapsed playing time, audio/subtitle language, angle) and player information (for example, repeat play, play mode). Some icons only allow you to view the indicated information. Other icons allow you to change the settings.
Note: All GUI functions are only available through your remote control. You cannot use the receiver to access GUI menus.
1.3Press GUI during playback.
Icons of the current title number, current chapter number, elapsed time, the current audio soundtrack language, current subtitle language, and current angle number appear.
Below each icon is the current information for that menu (for example, ( appears under the chapter icon when you are watching the movie’s second chapter).
Notes:
•Some DVDs might not provide all of the above GUI menu icons.
•The
2.Press the remote’s 6or 7 to select the desired item. The currently selected item is highlighted.
The first icon is the title icon. When you select it,
you can jump to the desired title number by pressing the remote’s number keys, then
ENTER.
The second icon is the chapter icon. When you select it, you can jump to the desired chapter number by pressing the remote’s number keys, then ENTER.
The third icon is the time icon. When you select it, you can move to a desired time in the movie by pressing the number keys, then ENTER.
The fourth icon is the audio icon. When you select it, you can change the soundtrack language by repeatedly pressing AUDIO until the desired language appears. To select the current setting, press ENTER.
The fifth icon is the subtitle icon. When you select it, you can change the subtitle language
by repeatedly pressing until the desired language appears. To select the current setting, press ENTER.
The last icon is the angle icon. When you select it, you can change the angle by repeatedly pressing ANGLE until the desired number appears. To select the current setting, press
ENTER.
Using a Title Menu
Some DVDs may contain two or more titles. If the disc has a title menu recorded on it, you can use TITLE to select the movie title.
Notes:
•The details of operation might differ depending on the DVD.
•Selecting a title might not be possible on certain DVD discs.
1.3Press TITLE. A list of the DVD’s titles appears.
2.Press BAND/ J or ENTER to resume play from the scene when TITLE was first pressed.
3.Press 8, 9, 6, or 7, then ENTER or BAND/ J. Or press the numeric button(s), to select the desired title. The selected title starts playing.
163— Use the remote for these steps. 4— Use the receiver for these steps. 3or 4— Use either device for these steps.