HP LTN1765 manual Connecting a VCR, Unplug the cable or antenna from the back of the TV

Page 15

IN S TA L L AT I O N

Connecting a VCR

These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 2.1-2.3).

Skip step 1 if you have not yet connected to an antenna or a cable system.

1

Unplug the cable or antenna from the back of the TV.

2

Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR.

3

Connect a coaxial cable between the ANTENNA OUT terminal on the VCR and the antenna terminal on the TV.

VCR Rear Panel	TV Rear Panel
	Pr Audio(L) Audio(R)
	Coaxial Cable

A coaxial cable is usually included with a VCR. (If not, check your local electronics store).

4

Connect a set of audio cables between the AUDIO OUT jacks on the VCR and the AUDIO jacks on the TV.

VCR Rear Panel

TV Rear Panel

Audio Cable

If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up to the left and right audio input jacks of the TV.

If your VCR is stereo, you must connect two cables.

5

Connect a video cable between the VIDEO OUT jack on the VCR and the VIDEO jack on the TV.

VCR Rear Panel

TV Rear Panel

Video Cable

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

2.5

Image 15

Contents TFT-LCD Television Risk of Electric Shock Do not Open Thank You for Choosing Samsung Page Installation Your New TVOperation Troubleshooting Accessories List of FeaturesFamiliarizing Yourself with The TV Power Input Connector PC Video Input Number Buttons Antennas with 300-ohm Flat Twin Leads Connecting VHF and UHF AntennasCable without a Cable Box Connecting Cable TVAntennas with 75-ohm Round Leads Separate VHF and UHF AntennasConnecting to a Cable Box that Descrambles Some Channels Connecting to a Cable Box that Descrambles All ChannelsS TA L L AT I O N Unplug the cable or antenna from the back of the TV Connecting a VCRConnecting an S-VHS VCR Connecting a Digital TV Set-Top Box Connecting a DVD PlayerConnecting a Camcorder Installing Batteries in the Remote Control Viewing the Menus Press the Power button on the remote controlTurning the TV On and Off Viewing the Menus and On-Screen DisplaysPress the CH button to select Language Selecting a Menu LanguageMemorizing the Channels Selecting the Video Signal-sourcePress the Menu button Storing Channels in Memory Automatic MethodChanging Channels Using the Channel ButtonsDirectly Accessing Channels Using the Pre-CH Button to select the Previous ChannelUsing Mute Adjusting the VolumeButtons to select a Customizing the PicturePress the Menu button to display the menu Press the CH or CHAlternate method Using Automatic Picture SettingsCustomizing the Sound Using Automatic Sound Settings Viewing an External Signal Source TV’s A/V jacks, and the TV signalPress the TV/VIDEO button Fine Tuning Channels Press the VOL + and VOL buttons to adjust the fine tuningSelect the appropriate channel LNA Low Noise Amplifier Changing the Screen Size Freezing the PicturePress the Aspect button to change the screen size Choosing a Multi-Channel Sound MTS Soundtrack Special Sound OptionsPress the VOL + button to select On Virtual DolbyPress the Menu button to display the on-screen menu Setting the Sleep TimerViewing Closed Captions Activating Picture-in-Picture Viewing Picture-in-PictureSelecting a Signal Source External A/V for PIP Changing the Location of the PIP WindowChanging the Size of the PIP Window Press the VOL+ button Using the V-ChipSetting Up Your Personal ID Number PIN Select V-chip, thenHow to Set up Restrictions Using the TV guidelines How to Enable/Disable the V-ChipGeneral audience Digit PIN number Press the CH buttonButton TV guidelines Buttons to select one of the six age-based categoriesSP E C I a L FE AT U R E S Mpaa rating Using Your TV as a Computer PC Display How to Connect Your PC to the TVHow to Set up Your PC display How to Set up Your PC Software Windows Adjusting Fine Adjusting the Screen QualityChanging the Screen Position Changing the Screen Color Standard Adjusting the Screen Color Settings To Initialize the Screen Position or Color Settings Adjusting the PC Screen Automatically Problem Possible Solution Identifying ProblemsProblem Possible Solution Retractable Stand PIN Pin AssignmentsDisplay Modes Using Your TV in Another Country Cleaning and Maintaining Your TVInstalling the Wall Mount Kit Sold separately Specifications FCC Information