Operating Instructions
Playback (Basic play) | Other playback functions |
Repeat and Random play
Other useful functions
Refer to the illustrations on pages 34 to 36 of the Japanese text.
Preparation
≥Release HOLD.
≥Insert a MD.
1 Connect the remote control and earphones, then insert the remote control's plug into the headphone jack [Ë] on the unit.
2Main unit
Press [1/;, CHARA] to start play.
Remote control
Press [1/∫] to start play.
The unit stops automatically when all the tracks on the disc have been played.
3Adjust the volume.
r: To increase the volume level
s: To decrease the volume level Volume level is
∫To pause play
Main unit
Press [1/;, CHARA] during play.
∫To stop the disc
Main unit
Press [∫, OPR OFF].
Remote control
Press [1/∫].
≥The unit powers itself off automatically in about a minute.
≥You can turn off the unit by pressing again [∫, OPR OFF] on the main unit while stopped.
∫Resume function
The unit stores the point at which play was stopped and if [1/;, CHARA] on the main unit or [1/∫] on the remote control is pressed again, play begins from that point. This does not work if the unit is opened or if the battery is removed. The unit starts play from the first track in these cases.
∫Playback for long times
| ≥MDLP |
| ≥You can play tracks recorded with MDLP |
| mode. |
| ≥Monaural playback |
RQT5997 | ≥If a disc was recorded monaurally, the unit |
The unit selects the play mode according to | |
| automatically switches to monaural |
playback mode.
the recording mode: normal stereo, 2 x play
82stereo (LP2), or 4 x play stereo (LP4),
monaural.
Refer to the illustrations on pages 37 to 40 of the Japanese text.
Skip
This function skips tracks and play begins from the beginning of the selected track.
Main unit
Press during play.
Forward : [9]
Backward : [:]
Remote control
Press during play.
Forward : [9]
Backward : [:]
Search
This function allows you to
Main unit
Press and hold during play.
Forward : [9]
Backward : [:]
Remote control
Press and hold during play.
Forward : [9]
Backward : [:]
Track/group select
This function allows you to begin listening from a selected track or group.
1 | Main unit | Remote control |
To listen to the track you like Press while stopped.
To listen to the group you like Press and hold while stopped.
Forward : [9]
Backward : [:]
2Main unit
Press [1/;, CHARA] to start play.
Remote control
Press [1/∫] to start play.
Play starts from the selected track or group and plays through to the final track.
Main unit
Press [MODE, DELETE] when the unit is stopped or playing.
Remote control
Press [PLAY MODE] when the unit is stopped or playing.
The mode changes each time the button is pressed.
1 track repeat
One track is played over and over.
;
All track repeat (`)
All tracks on the disc are repeated.
;
Random (RANDOM)
All tracks are played randomly once each then the unit stops automatically.
;
Normal (no indicator is shown)
If you have selected the mode when the unit was stopped, press [1/ ;, CHARA] (main unit) or [1/∫] (remote control).
Sound quality
Main unit
Press [EQ/ REC SENS, SPACE] when the unit is stopped or playing.
Remote control
Press [T.MARK/EQ] when the unit is stopped or playing.
Every time the button is pressed the mode changes and an indicator is shown on the display in the following order.
Increases the power of the bass sounds.
;
Increases the
;
TRAIN
Reduces sounds that may annoy others when you are using the unit in a public place.
;
NORMAL (Cancel)
Refer to the illustration on pages 41 to 43 of the Japanese text.
About the display
∫To light the display of the remote control
The display lights for about 5 seconds when an operation is done on the remote control. It remains lit for up to 20 seconds while a track or disc title is scrolling on the screen.
∫Checking the display of the remote control
Press [$LIGHT/%DISP].
The display lights for 5 seconds.
∫Adjusting the display's contrast
When the unit is powered on:
1Put the main unit in hold (See page 17 of the Japanese text.) .
21Press and hold [1/ ;, CHARA] on the main unit and ...
2Main unit
2Press [M s,r L ,VOL/CURSOR].
Remote control
2Press [r, s ].
+ : darker, - : lighter
Change the display
Main unit
Press [DISP,CAPS] when the unit is stopped or playing.
The display changes each time this is done to show the remaining playing time, the group title, remaining recording time, the disc title, playing time of all tracks, total numbers of tracks, elapsed playing time, the track number and the track title.
Note |
|
| |
The remaining recording time shown |
| ||
corresponds to the recording mode (normal, |
| ||
| |||
LP2, or LP4) currently selected. | ENGLISH | ||
Remote control | |||
Press and hold [$LIGHT/%DISP] when the |
| ||
unit is stopped or playing. |
| ||
The display changes each time this is done |
| ||
to show the track title, the group title, the |
| ||
disc title, playing time of all tracks, total |
| ||
numbers of tracks, elapsed playing time and |
| ||
the track number. |
| ||
∫The operation tone of the remote control |
| ||
A tone sounds when a button on the remote |
| ||
control is pressed. | RQT5997 | ||
The tone can be turned on and off. | |||
| |||
To turn on |
| ||
Press and hold [1/∫] until “Beep ON” |
| ||
appears. |
| ||
To turn off | 83 | ||
Press and hold [1/∫] until “Beep OFF” |
appears.