HP Mobile POS G2 Solution manual Credit card reader board, Description Spare part number

Page 86

Credit card reader board

NOTE: The credit card reader board spare part kits do not include the respective cables. The cables are included in the Cable Kit, spare part number 744031-001.

Description

Spare part number

 

 

Left-side credit card reader board

744027-001

 

 

Right-side credit card reader board

744028-001

 

 

Before removing the credit card reader boards, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet or the Retail Jacket.

3.Disconnect all external devices from the Retail Jacket.

4.Remove the top cap (see Top cap on page 67).

5.If installed, remove the tablet from the Retail Jacket (see Top cap on page 67).

6.Remove the front cover (see Front cover on page 69).

Remove the credit card reader boards:

1.Remove the Phillips PM1.9×3.0 screw (1) that secures the left-side credit card reader board to the rear cover.

2.Turn the left-side credit card reader board (2) over so the ZIF connector on the back of the board is accessible.

78

Chapter 5 Removal and replacement procedures

Image 86
Contents HP ElitePad 1000 G2 Copyright 2014 Hewlett-Packard Development Company, L.P Safety warning notice Iv Safety warning notice Table of contents Computer Setup and HP PC Hardware Diagnostics Uefi Specifications Viii Product description Product description Operating system Preinstalled Category Description SecurityComponent Description External component identificationFront CyberLink YouCamRear Refer to the Regulatory, Safety, and Environmental TopBottom Description Function Service tagIllustrated parts catalog Display Cable Kit , includes Tablet major componentsComponent Spare part number Wwan module Antenna Kit, includes747628-001 Retail Jacket components Battery bay space saverCable connector board Description Spare part numberRetail Jacket components Security Jacket components Adapter cables Description Spare part number Docking station Docking station and accessoriesHP Smart AC adapter RC, V, 3-wire Miscellaneous parts Component Spare part number Power components Duck head power adapterHP Mobile Connect SIM not illustrated Sequential part number listingCard Reader Cover Kit not illustrated Tape Support KitSequential part number listing Illustrated parts catalog Sequential part number listing Slot cover hardware, and volume button actuator Sequential part number listing Plastic parts Cables and connectors Removal and replacement preliminary requirementsService considerations Tools requiredGrounding guidelines Electrostatic discharge damagePackaging and transporting guidelines Equipment guidelines Material Use Voltage protection levelDisplay assembly Removal and replacement proceduresTablet component replacement procedures Page Page Page Page Page Page Page NFC antenna Description Spare part number NFC antenna 747633-001Wwan module Page Wlan module Page Microphones Rear-facing webcam Power button board Page Volume button board Page Audio jack board Vibrator module Battery Page System board Page Page Page Forward-facing webcam Slot cover Docking connector cable Page Wlan antenna Page WWAN/GPS auxiliary antenna Page Speakers Page Retail Jacket component replacement procedures Top capBattery 2-cell, 21-Wh, 2.96-Ah, Li-ion 687946-001 Front cover Page Page Page Bar code scanner module and Cable connector board Page Battery connector board System board Page Credit card reader board Page Credit card reader Description Spare part number Credit card reader 744026-001Page Security Jacket component replacement procedures Card reader cover and Top capPage Description Spare part number Front cover 744048-001 Page System board Docking connector cable Card reader board Description Spare part number Card reader board 744043-001Fingerprint reader board Page Starting Computer Setup Computer Setup and HP PC Hardware Diagnostics UefiUsing Computer Setup Navigating and selecting in Computer Setup Restoring factory settings in Computer SetupUpdating the Bios Downloading a Bios UpdateUsing HP PC Hardware Diagnostics Uefi Select System DiagnosticsSpecifications Tablet specificationsBackup and recovery Backing up your informationPerforming a system recovery Using the Windows recovery toolsUsing f11 recovery tools Changing the boot device orderUsing Windows Refresh or Windows Reset Statement of Volatility Select the File menu, then Save Changes and Exit Non-volatile memory usage CmosNon-volatile memory usage Statement of Volatility Questions and answers Power cord set requirements Requirements for all countriesRequirements for specific countries and regions Country/region Accredited agency Applicable note numberRecycling Symbols/Numerics IndexPage Screw Kit, spare part numbers

Mobile POS G2 Solution, Mobile POS G1 Solution specifications

In the rapidly evolving landscape of retail and service industries, the need for robust mobile point-of-sale (mPOS) solutions has become increasingly pronounced. HP's Mobile POS G1 and G2 Solutions stand out as two of the leading systems designed to cater to the demands of modern businesses. These solutions integrate cutting-edge technology with user-centric design, offering a seamless transaction experience for both businesses and customers.

The HP Mobile POS G1 Solution pioneers in its ability to enhance operational efficiency and customer engagement. One of its main features is the compact and ergonomic design, making it easy for staff to handle while providing a range of functionalities. It is powered by a durable tablet interface, which runs on Windows operating systems, allowing for familiar navigation and integration with existing software.

For payment processing, the G1 solution supports various methods, including traditional card swipes, contactless payments, and mobile wallets, ensuring flexibility for customers. Its robust security features, including end-to-end encryption, help protect sensitive transaction data, instilling confidence in both businesses and their clients.

On the other hand, the HP Mobile POS G2 Solution builds on the success of its predecessor by incorporating even more advanced features and enhanced technologies. It features improved processing power with faster CPUs and greater RAM capacity, allowing for smooth multitasking and quick transaction times. Its state-of-the-art display offers a crisp and vibrant user interface, enhancing the overall customer experience.

The G2 solution also introduces advanced connectivity options, such as improved Wi-Fi and Bluetooth capabilities, enabling seamless integration with a variety of peripherals like barcode scanners and printers. Moreover, the G2 is equipped with a more robust battery life, ensuring that the device can handle long shifts without requiring frequent recharging.

Both the G1 and G2 solutions emphasize mobility, ensuring that staff can efficiently serve customers from anywhere in the store or venue. They are designed to support various retail and hospitality environments, providing the versatility that modern businesses require.

In conclusion, HP's Mobile POS G1 and G2 solutions represent effective tools in the realm of mobile transactions. With their combination of security, ease of use, and advanced technology, they empower businesses to enhance their efficiency while delivering exceptional customer service. Whether opting for the established G1 or the advanced G2, businesses can select a solution tailored to their specific needs, ensuring a competitive edge in an increasingly digital marketplace.