HP Mobile POS G1 Solution, Mobile POS G2 Solution manual Fingerprint reader board

Page 97

Remove the card reader board:

1.Position the rear cover with the bottom toward you.

2.Detach the tape (1) that secures the card reader board to the rear cover.

3.Remove the card reader board (2) and cable.

Reverse this procedure to install the card reader board.

Fingerprint reader board

Description

Spare part number

 

 

Fingerprint reader board

744042-001

 

 

Before removing the fingerprint reader board, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet or the Security Jacket.

3.Disconnect all external devices from the Security Jacket.

4.Remove the card reader cover and top cap (see Card reader cover and Top cap on page 82).

5.If installed, remove the tablet from the Security Jacket (see Card reader cover and Top cap on page 82).

6.Remove the front cover (see Front cover on page 84).

Security Jacket component replacement procedures

89

Image 97
Contents HP ElitePad 1000 G2 Copyright 2014 Hewlett-Packard Development Company, L.P Safety warning notice Iv Safety warning notice Table of contents Computer Setup and HP PC Hardware Diagnostics Uefi Specifications Viii Product description Product description Category Description Security Operating system PreinstalledFront External component identificationComponent Description CyberLink YouCamRear Top Refer to the Regulatory, Safety, and EnvironmentalBottom Illustrated parts catalog Service tagDescription Function Component Spare part number Tablet major componentsDisplay Cable Kit , includes Antenna Kit, includes Wwan module747628-001 Cable connector board Battery bay space saverRetail Jacket components Description Spare part numberRetail Jacket components Security Jacket components Adapter cables HP Smart AC adapter RC, V, 3-wire Docking station and accessoriesDescription Spare part number Docking station Miscellaneous parts Component Spare part number Duck head power adapter Power componentsCard Reader Cover Kit not illustrated Sequential part number listingHP Mobile Connect SIM not illustrated Tape Support KitSequential part number listing Illustrated parts catalog Sequential part number listing Slot cover hardware, and volume button actuator Sequential part number listing Service considerations Removal and replacement preliminary requirementsPlastic parts Cables and connectors Tools requiredElectrostatic discharge damage Grounding guidelinesPackaging and transporting guidelines Material Use Voltage protection level Equipment guidelinesTablet component replacement procedures Removal and replacement proceduresDisplay assembly Page Page Page Page Page Page Page Description Spare part number NFC antenna 747633-001 NFC antennaWwan module Page Wlan module Page Microphones Rear-facing webcam Power button board Page Volume button board Page Audio jack board Vibrator module Battery Page System board Page Page Page Forward-facing webcam Slot cover Docking connector cable Page Wlan antenna Page WWAN/GPS auxiliary antenna Page Speakers Page Top cap Retail Jacket component replacement proceduresBattery 2-cell, 21-Wh, 2.96-Ah, Li-ion 687946-001 Front cover Page Page Page Bar code scanner module and Cable connector board Page Battery connector board System board Page Credit card reader board Page Description Spare part number Credit card reader 744026-001 Credit card readerPage Card reader cover and Top cap Security Jacket component replacement proceduresPage Description Spare part number Front cover 744048-001 Page System board Docking connector cable Description Spare part number Card reader board 744043-001 Card reader boardFingerprint reader board Page Using Computer Setup Computer Setup and HP PC Hardware Diagnostics UefiStarting Computer Setup Restoring factory settings in Computer Setup Navigating and selecting in Computer SetupDownloading a Bios Update Updating the BiosSelect System Diagnostics Using HP PC Hardware Diagnostics UefiTablet specifications SpecificationsBacking up your information Backup and recoveryUsing the Windows recovery tools Performing a system recoveryChanging the boot device order Using f11 recovery toolsUsing Windows Refresh or Windows Reset Statement of Volatility Select the File menu, then Save Changes and Exit Cmos Non-volatile memory usageNon-volatile memory usage Statement of Volatility Questions and answers Requirements for all countries Power cord set requirementsCountry/region Accredited agency Applicable note number Requirements for specific countries and regionsRecycling Index Symbols/NumericsPage Screw Kit, spare part numbers

Mobile POS G2 Solution, Mobile POS G1 Solution specifications

In the rapidly evolving landscape of retail and service industries, the need for robust mobile point-of-sale (mPOS) solutions has become increasingly pronounced. HP's Mobile POS G1 and G2 Solutions stand out as two of the leading systems designed to cater to the demands of modern businesses. These solutions integrate cutting-edge technology with user-centric design, offering a seamless transaction experience for both businesses and customers.

The HP Mobile POS G1 Solution pioneers in its ability to enhance operational efficiency and customer engagement. One of its main features is the compact and ergonomic design, making it easy for staff to handle while providing a range of functionalities. It is powered by a durable tablet interface, which runs on Windows operating systems, allowing for familiar navigation and integration with existing software.

For payment processing, the G1 solution supports various methods, including traditional card swipes, contactless payments, and mobile wallets, ensuring flexibility for customers. Its robust security features, including end-to-end encryption, help protect sensitive transaction data, instilling confidence in both businesses and their clients.

On the other hand, the HP Mobile POS G2 Solution builds on the success of its predecessor by incorporating even more advanced features and enhanced technologies. It features improved processing power with faster CPUs and greater RAM capacity, allowing for smooth multitasking and quick transaction times. Its state-of-the-art display offers a crisp and vibrant user interface, enhancing the overall customer experience.

The G2 solution also introduces advanced connectivity options, such as improved Wi-Fi and Bluetooth capabilities, enabling seamless integration with a variety of peripherals like barcode scanners and printers. Moreover, the G2 is equipped with a more robust battery life, ensuring that the device can handle long shifts without requiring frequent recharging.

Both the G1 and G2 solutions emphasize mobility, ensuring that staff can efficiently serve customers from anywhere in the store or venue. They are designed to support various retail and hospitality environments, providing the versatility that modern businesses require.

In conclusion, HP's Mobile POS G1 and G2 solutions represent effective tools in the realm of mobile transactions. With their combination of security, ease of use, and advanced technology, they empower businesses to enhance their efficiency while delivering exceptional customer service. Whether opting for the established G1 or the advanced G2, businesses can select a solution tailored to their specific needs, ensuring a competitive edge in an increasingly digital marketplace.