Using the Stabilizer Feature
The Stabilizer feature is for Photo taking only. This feature is designed to help reduce the blurring effects on photos caused by slight camera movement. It is important to note that this feature cannot compensate for all movement and lighting situations and that in many cases may slow the camera’s ability to auto focus.
How does it work? It works according to the luminance of the target object. This function uses special image data processing to optimise the high sensitivity of CCD sensor (also known as the digital film). High sensitivity allows the use of faster shutter speeds compared to the default mode, so it may reduce blurring caused by camera movement.
Stabilizer button
To activate Stabilizer
•Press the Stabilizer button 
located on the top of the camera to enable/disable stabilizer.
If Stabilizer is enabled, the stabilizer icon is displayed on
the LCD screen and the ISO setting is automatically setStabilizer on to Automatic. See “ISO” on page 27 for more details.
Setting the Zoom Control
Using a combination of 4 times optical zoom and 5 times digital zoom permits zoom photography at up to 20 times magnification. While the digital zoom can be a useful feature, the more an image is enlarged (zoomed), the more pixelated (grainier) the image may appear. Please refer to “Setting the Digital Zoom” on page 42 on how to setup digital zoom.
To adjust the optical zoom:
1.Move the Zoom toggle 
to the left 
to zoom out or to the right 
to zoom in.
2.The zoom indicator appears on the LCD monitor 
.
To adjust the digital zoom:
1. Activate digital zoom. See “Setting the Digital Zoom” on page 42.
2. Move the Zoom toggle to the T position | until the maximum 4X optical zoom is reached. |
3.Momentarily center the zoom toggle then move to the T position again to initiate the Digital Zoom feature.
4.Moving the toggle to the W position will zoom out and return the camera to optical zoom.
23