HP SW450 manual Using Voice Recording, Setting the Drive Mode, To set the Drive Mode

Using Voice Recording

1.From the Scene menu, select . The Voice Recording screen layout is displayed on the LCD monitor.

2.Press the Shutter button to start recording.

3.Press the Shutter button again to stop recording.

Setting the Drive Mode

This camera features a Self-timer and Burst which can be set in the Burst mode function in the Record Menu. The Self-timer will take photos after a predefined delay. The burst will take consecutive shots. This function is only available in Photo mode. The Burst mode setting is automatically set to off when you turn off the camera.

To set the Drive Mode

1.From the Record menu, select Drive Mode.

2.Use the or keys to go through the selection.

3.Press the OK button to save and apply changes.

The table below shows the available Drive mode settings.

Icon	Item	Description
	10 Sec Self-timer	Sets a 10-second delay to capture image after pressing the Shutter button.
	2 Sec Self-timer	Sets a 2-second delay to capture image after pressing the Shutter button.
		Performs delay and capture twice:
	Double Self-timer	• Performs a 10-second delay, then captures the image.
		• Performs another 2-second delay then captures the image again.
	Burst	Performs continuous shooting when the Shutter button is pressed.
		Stops shooting when the shutter button is released.
	Speedy Burst	Captures 30 images in a shot when the Shutter button is pressed.
		Auto set Image size to VGA only.

Off

Captures an image without time delay.

40