Getting Started
Attaching the Wrist Strap
To reduce the risk of dropping the camera, it is strongly recommended to attache and use the provided camera strap.
Follow these instructions to attach the wrist strap to your camera to better protect your new camera:
1. Insert the smaller loop of the strap in the strap eyelet.
2. Thread the larger loop of the strap though the short loop and pull tight to attach the strap to the camera.
Inserting the Battery
Follow these instructions to insert the NP45
1.If the battery is already installed, make sure to power off the camera before removing and inserting a recharged or new battery.
2.Open the battery compartment at the bottom of the camera.
3. Insert the battery into the compartment with the terminal facing inside the camera.
7