Toshiba IK-WB02A manual Structure of Connection

Page 30

Installation/Set up

and OperationViewing • Listening

Recording

Setting up

Others

Connecting the Camera and Personal Computer by Network(Cont.)

Structure of Connection

There are following two structures for connection of the network camera:

•Use a crossover cable

•Connect with a hub or router

●Using a crossover cable to establish a connection (example)

Network camera

Personal computer

IP address

IP address

192.168.0.30

192.168.0.50

LAN cable (crossover)

Crossover cable is not provided with the product.

●Establishing a connection via a hub or router (example)

Network camera

IP address

192.168.0.30

Internet

Personal computer

Hub or router

IP address

192.168.0.50

LAN cable (straight through)

LAN cable (straight through)

Straight through cable, hub, or router, etc. is not provided with the product.

NOTE

●You do not need to assign an IP address to a hub.

●In the case of not using DHCP server, the IP address for the camera is automatically set to 192.168.0.30 in default.Therefore, set the IP address for your computer to , for example, set to 192.168.0.50.(When directly connecting with a crossover cable or connecting with a hub, it should be run in the same network segment).

When using multiple cameras, connect the first camera at IP address 192.168.0.30 and set different IP addresses (192.168.0.31, etc.) for the second camera and after.

●There will be no problem to use the LAN port of your broadband router instead of using a hub.

However, when using the broadband router, if the “Connection Settings” is set “Automatically by DHCP” and turn on the power after connecting the camera with the router, the camera gets the IP address from the router’s DHCP server and it may not be 192.168.0.30.

For more information, read your user’s guide for broadband router.

It is also recommended to set the computer’s IP address from the router’s DHCP server. For more information, read your computer’s user’s guide.

14

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Model IK-WB02A Fccus Information Canadian Information Introduction Terms and TrademarksAccessories Table of Contents Read Instructions CleaningAccessories Retain Instructions Heed Warnings Follow InstructionsVentilation Power SourcesPower-Cord Protection LightningSafety Check Damage Requiring serviceReplacement Parts ServicingField Installation Marking Do not aim the camera at the sun Install the camera Where no video noise appearsCheck the ambient temperature and humidity Do not shoot intense lightPrecautions for Use About the SD Memory CardAbout the PoE Power Supply Device About the AC AdapterPrecautions for Use About the softwareCamera Installation Guide Toshiba America Information SYSTEMS. INC Network Camera Table of Contents Setting up Important Safety Instructions Names and Features of Parts Power Select switch Tripod Screw Hole Phase Controller LL switch BLC switchIris switch Iris Jack 4PInstallation/Setup Installing a Lens Connecting to a Video MonitorAbout Audio Input/Output CAMERA1 Monitor TV CAMERA2 Video Switcher Line-Lock controlAdjusting the Iris Adjusting a LensAdjusting the Back Focus Set the iris switch on the right Side of the camera DefaultBack Light Compensation Auto White Balance AWBFixed iris lens Setting Up the Network Camera Environment Requirements for Network Camera Monitoring SystemAbout the IP Address Obtaining an IP address automatically from the Dhcp serverEntering an IP Address Manually Structure of Connection Connecting Connect a LAN cable and then turn the power on Set the IP address of the personal computerClick the camera you want to login from the list of cameras Setting up Camera FinderUsing Camera Finder to Search for a Camera Click the User button Click Exit button to close Camera FinderChanging Administrator Login ID and Password Click Admin on the left side of the screenClick the Change button Click the browserSetting up Access Restriction Click User on the left side of the screenClick the Set/Change button Configuring the Network Manually Click Network on the left side of the screenSelect Manually Click the Save buttonPage Operation Close the browser to log off disconnect the camera Viewing and ListeningViewing Images Audio ListeningMenu that is displayed when right-clicking on the image Camera Window ScreenAdjusting Images on the Camera BLC1 BLC2 BLC3 BLC4BLC5 Adding Images Using Playback Function Click Playback on the left side of the Camera Window screenAbout the Playback Operating Buttons Playing Alarm Images Click the button on the right side of the alarm listAlarm List Playing Recorded Normal Images Click the button on the right side of the normal listNormal List Viewing Logs Click View log on the left side of the Camera Window screenSpeaking Click the Audio Out start button below the imagePage Recording Recordable Media Recordable Contents About Recording ImagesRecording Settings Insert an SD memory card Recording Images on an SD Memory CardClick Recording on the left side of the screen Configure each setting items Alarm RecordingNormal Recording Images on FTP Server Click FTP client on the left side of the screenFTP General Settings Click the Save Settings button below the setting Connect to FTP EnableConfigure Intervals Configure recording scheduleConfigure timer pattern Periodic FTP by ScheduleClick Save Settings button to save configured items Enter File NameEnter Server Path FTP by External Alarm/Motion Detection EX/MD FTP by EXT Control Recording Data by EXT Control HhmmssImage Accumulation to SD Memory Card File Transfer Order Setting up Recording Click Image RecordingRecording Images on a Personal Computer Click the Start buttonClick Save Current Picture As Specify the destination folder and file namePage Setting up How to Set up Configure each itemSystem Settings Click System on the left side of the screenChanging the camera name Changing the time using an NTP server setting Setting up a format to display date/timeSetting the color of date/time display Adjusting the date and timeImporting the Settings Saved on a Personal Computer Rebooting the network cameraClick Firmware update Updating the FirmwareUser Settings Displaying the screen asking a user name and passwordStoring the user name and password Deleting a user nameAdmin Settings Changing the Administrator ID and passwordSetting Sound Restarting the cameraAlarm Settings Click Alarm on the left side of the screenConfiguring an external alarm Setting the motion detection Setting up EXT ControlNetwork Settings Configuring the connectionConfiguring the Http port number Mail Settings Click Mail on the left side of the screenSetting up FTP Client Settings FTP Server Settings Click FTP server on the left side of the screenDdns Settings Click Ddns on the left side of the screenRecording Settings Audio Settings Click Sound on the left side of the Camera Window screenUpdating the Firmware Before StartingClick Firmware update Click the Browse buttonClick Upload button on the screen shown in Step Click Export current configurations Specify the destination and then save the fileSelect the file on settings you saved Click Import on the screen shown in StepOthers Alarm Terminals Specifications of Alarm Signals Example Circuit ConnectionAccessories Safety Precautions5 Index GlossaryFTP Smtp Wall bracket Safety Precautions15 Display of Logs FTP downaccumulation finish Before Calling Service Personnel Cannot login to BrowserTrying to login CapsLock of the PC is Before Calling Service Personnel... RAM Wrong way Gather sound Poor Cannot send Symptom Cause How to Manage Recorded Others Specifications IK-WB02AAppearance Diagram Toshiba America Information SYSTEMS. INC How to use EMI core EMIコアの使いかたAbout the Power Select Switch When power is supplied from a PoE compatible hub, etcWhen power is supplied from an AC24V or DC12V power source
Related manuals
Manual 4 pages 24.98 Kb Manual 4 pages 31.62 Kb

IK-WB02A specifications

Toshiba has made significant strides in the realm of advanced surveillance technology with its series of camera models, including the IK-WB02A, FSM-3610, FB-3010HB, IK-WB15A, and IK-6420A. Each of these models carries unique features and functionalities designed to cater to various surveillance needs.

The Toshiba IK-WB02A is a compact yet powerful network camera that excels in providing high-definition video feeds. Notable for its 2 MP resolution, it offers sharp image clarity and detailed visuals, making it an ideal choice for any indoor surveillance application. Its PoE (Power over Ethernet) functionality simplifies installation, reducing the clutter of cables. The camera also supports H.264 compression technology, which allows for efficient video streaming while conserving bandwidth.

Moving on to the FSM-3610, this camera is celebrated for its enhanced low-light capabilities. Equipped with a wide dynamic range (WDR) feature, it can capture clear images even in challenging lighting conditions. The FSM-3610 is particularly suitable for outdoor surveillance, providing weather-resistant housing and a rugged design that withstands the elements. It also includes motion detection features, which trigger alerts when activity is detected in monitored areas.

The FB-3010HB model is designed for flexibility and discretion. With its compact size and high-definition video resolution, it is perfect for environments where space is limited. Its ability to seamlessly integrate with existing video management systems enhances its adaptability. The FB-3010HB also supports wireless connectivity, allowing for remote access and monitoring, which is paramount in today’s security landscape.

Toshiba's IK-WB15A is another innovative offering, featuring advanced image stabilization technology that ensures stable video feeds even in high-motion environments. This model includes multiple streaming capabilities, enabling simultaneous streaming for different resolutions. It is well-suited for both indoor and outdoor applications, providing versatile surveillance options.

Lastly, the IK-6420A is a high-performance camera equipped with robust analytics capabilities. It comes with built-in video analytics features that allow for intelligent monitoring, including face detection and line crossing detection. Its user-friendly interface facilitates easy management and configuration, making it accessible for various users, from businesses to residential applications.

In summary, Toshiba's range of cameras—including the IK-WB02A, FSM-3610, FB-3010HB, IK-WB15A, and IK-6420A—showcases a blend of innovative technologies, user-friendly features, and adaptability for diverse surveillance requirements. Each model brings distinct capabilities to the table, catering to an array of security challenges.
Top Page Image Contents