Toshiba IK-WB02A manual Connecting Connect a LAN cable and then turn the power on

Page 31

Connecting

Connect a LAN cable and then turn the power on.

Connect the LAN cable (straight) leading to the camera with a powered hub. Alternatively, use a LAN cable (crossover) to connect the camera with the powered personal computer.

●When connecting a PoE compatible hub/router/LAN cable, availabe to the camera even though there is no connection at the power plug.

●When not using a PoE compatible hub, connect AC24V or DC12V power plug with the power plug terminal.

Set the IP address of the personal computer.

●Set the IP address of the computer to a setting different that 192.168.0.30 (camera’s IP address).

•Set the IP address to 192.168.0.50 (and subnet mask to 255.255.255.0) as an example.

•For details on the procedure, refer to the user’s guide of the personal computer.

Make sure whether the camera receives a reply from the personal computer.

●Start a command prompt and then run “ping 192.168.0.30.”

●If the “Reply from…” message appears, the connection is correctly established.

Search for the network camera with the “Camera Finder” (➝ page. 16) and then view camera images.

a)Start “Camera Finder” and click the “Search” button.

•Confirm that the camera name “nwcam02” and the IP address “192.168.0.30” are displayed in the camera list.

b)Click camera name, “nwcam 02”, to select.

•Check that the camera name, the IP address and the HTTP port number are displayed in the login field of the network camera.

c)Click the “User” button.

•When the “User authorization” is set to “ON” (➝ page.21), a screen appears, asking you to enter the user name and the password. Enter the Administrator login ID and password or the registered user name and password.

d)The Camera Window screen appears.

NOTE

●To view the screen without using the “Camera Finder,” start the Internet browser, enter the URL “http://192.168.0.30/” and then press ENTER. When you enter a port number other than 80, specify the port number after “:” (e.g. http://192.168.0.30:88/).

●The camera takes about 30 seconds to start after the power is turned on.

Installation/Set up

and OperationViewing • Listening

Recording

Setting up

Others

15

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Model IK-WB02A Fccus Information Canadian Information Terms and Trademarks IntroductionAccessories Table of Contents Retain Instructions Heed Warnings Follow Instructions CleaningAccessories Read InstructionsLightning Power SourcesPower-Cord Protection VentilationServicing Damage Requiring serviceReplacement Parts Safety CheckField Installation Marking Do not shoot intense light Install the camera Where no video noise appearsCheck the ambient temperature and humidity Do not aim the camera at the sunAbout the SD Memory Card Precautions for UseAbout the AC Adapter About the PoE Power Supply DeviceAbout the software Precautions for UseCamera Installation Guide Toshiba America Information SYSTEMS. INC Network Camera Table of Contents Setting up Important Safety Instructions Names and Features of Parts Iris Jack 4P Phase Controller LL switch BLC switchIris switch Power Select switch Tripod Screw HoleInstallation/Setup Connecting to a Video Monitor Installing a LensAbout Audio Input/Output Line-Lock control CAMERA1 Monitor TV CAMERA2 Video SwitcherSet the iris switch on the right Side of the camera Default Adjusting a LensAdjusting the Back Focus Adjusting the IrisAuto White Balance AWB Back Light CompensationFixed iris lens Requirements for Network Camera Monitoring System Setting Up the Network Camera EnvironmentObtaining an IP address automatically from the Dhcp server About the IP AddressEntering an IP Address Manually Structure of Connection Set the IP address of the personal computer Connecting Connect a LAN cable and then turn the power onSetting up Camera Finder Click the camera you want to login from the list of camerasUsing Camera Finder to Search for a Camera Click Exit button to close Camera Finder Click the User buttonClick Admin on the left side of the screen Changing Administrator Login ID and PasswordClick the browser Click the Change buttonClick User on the left side of the screen Setting up Access RestrictionClick the Set/Change button Click Network on the left side of the screen Configuring the Network ManuallyClick the Save button Select ManuallyPage Operation Audio Listening Viewing and ListeningViewing Images Close the browser to log off disconnect the cameraCamera Window Screen Menu that is displayed when right-clicking on the imageAdjusting Images on the Camera BLC1 BLC2 BLC3 BLC4BLC5 Adding Images Click Playback on the left side of the Camera Window screen Using Playback FunctionAbout the Playback Operating Buttons Click the button on the right side of the alarm list Playing Alarm ImagesAlarm List Click the button on the right side of the normal list Playing Recorded Normal ImagesNormal List Click View log on the left side of the Camera Window screen Viewing LogsClick the Audio Out start button below the image SpeakingPage Recording About Recording Images Recordable Media Recordable ContentsRecording Images on an SD Memory Card Recording Settings Insert an SD memory cardClick Recording on the left side of the screen Alarm Recording Configure each setting itemsNormal Click FTP client on the left side of the screen Recording Images on FTP ServerFTP General Settings Connect to FTP Enable Click the Save Settings button below the settingPeriodic FTP by Schedule Configure recording scheduleConfigure timer pattern Configure IntervalsEnter File Name Click Save Settings button to save configured itemsEnter Server Path FTP by External Alarm/Motion Detection EX/MD Hhmmss FTP by EXT Control Recording Data by EXT ControlImage Accumulation to SD Memory Card File Transfer Order Click Image Recording Setting up RecordingClick the Start button Recording Images on a Personal ComputerSpecify the destination folder and file name Click Save Current Picture AsPage Setting up Configure each item How to Set upClick System on the left side of the screen System SettingsChanging the camera name Adjusting the date and time Setting up a format to display date/timeSetting the color of date/time display Changing the time using an NTP server settingUpdating the Firmware Rebooting the network cameraClick Firmware update Importing the Settings Saved on a Personal ComputerDisplaying the screen asking a user name and password User SettingsDeleting a user name Storing the user name and passwordChanging the Administrator ID and password Admin SettingsRestarting the camera Setting SoundClick Alarm on the left side of the screen Alarm SettingsConfiguring an external alarm Setting up EXT Control Setting the motion detectionConfiguring the connection Network SettingsConfiguring the Http port number Click Mail on the left side of the screen Mail SettingsSetting up FTP Client Settings Click FTP server on the left side of the screen FTP Server SettingsClick Ddns on the left side of the screen Ddns SettingsRecording Settings Click Sound on the left side of the Camera Window screen Audio SettingsBefore Starting Updating the FirmwareClick the Browse button Click Firmware updateClick Upload button on the screen shown in Step Specify the destination and then save the file Click Export current configurationsClick Import on the screen shown in Step Select the file on settings you savedOthers Alarm Terminals Example Circuit Connection Specifications of Alarm SignalsIndex Glossary Accessories Safety Precautions5FTP Smtp Wall bracket Safety Precautions15 Display of Logs FTP downaccumulation finish Cannot login to Browser Before Calling Service PersonnelTrying to login CapsLock of the PC is Before Calling Service Personnel... RAM Wrong way Gather sound Poor Cannot send Symptom Cause How to Manage Recorded Others IK-WB02A SpecificationsAppearance Diagram Toshiba America Information SYSTEMS. INC EMIコアの使いかた How to use EMI coreWhen power is supplied from a PoE compatible hub, etc About the Power Select SwitchWhen power is supplied from an AC24V or DC12V power source
Related manuals
Manual 4 pages 24.98 Kb Manual 4 pages 31.62 Kb

IK-WB02A specifications

Toshiba has made significant strides in the realm of advanced surveillance technology with its series of camera models, including the IK-WB02A, FSM-3610, FB-3010HB, IK-WB15A, and IK-6420A. Each of these models carries unique features and functionalities designed to cater to various surveillance needs.

The Toshiba IK-WB02A is a compact yet powerful network camera that excels in providing high-definition video feeds. Notable for its 2 MP resolution, it offers sharp image clarity and detailed visuals, making it an ideal choice for any indoor surveillance application. Its PoE (Power over Ethernet) functionality simplifies installation, reducing the clutter of cables. The camera also supports H.264 compression technology, which allows for efficient video streaming while conserving bandwidth.

Moving on to the FSM-3610, this camera is celebrated for its enhanced low-light capabilities. Equipped with a wide dynamic range (WDR) feature, it can capture clear images even in challenging lighting conditions. The FSM-3610 is particularly suitable for outdoor surveillance, providing weather-resistant housing and a rugged design that withstands the elements. It also includes motion detection features, which trigger alerts when activity is detected in monitored areas.

The FB-3010HB model is designed for flexibility and discretion. With its compact size and high-definition video resolution, it is perfect for environments where space is limited. Its ability to seamlessly integrate with existing video management systems enhances its adaptability. The FB-3010HB also supports wireless connectivity, allowing for remote access and monitoring, which is paramount in today’s security landscape.

Toshiba's IK-WB15A is another innovative offering, featuring advanced image stabilization technology that ensures stable video feeds even in high-motion environments. This model includes multiple streaming capabilities, enabling simultaneous streaming for different resolutions. It is well-suited for both indoor and outdoor applications, providing versatile surveillance options.

Lastly, the IK-6420A is a high-performance camera equipped with robust analytics capabilities. It comes with built-in video analytics features that allow for intelligent monitoring, including face detection and line crossing detection. Its user-friendly interface facilitates easy management and configuration, making it accessible for various users, from businesses to residential applications.

In summary, Toshiba's range of cameras—including the IK-WB02A, FSM-3610, FB-3010HB, IK-WB15A, and IK-6420A—showcases a blend of innovative technologies, user-friendly features, and adaptability for diverse surveillance requirements. Each model brings distinct capabilities to the table, catering to an array of security challenges.
Top Page Image Contents