DPOF
DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the photos to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified photos.
To set DPOF:
1.Press the MENU button to launch the Playback menu.
2.Select DPOF. The submenu appears. Available settings are as follows:
•Single. Select a single photo to mark.
•All. Mark all photos in the memory card.
•Reset. Reset all DPOF settings to initial default settings.
To set DPOF on a single photo/all photos:
1.Select Single or All on the DPOF submenu.
2.For single image, use Left/Right key on the navigation control to scroll and select an image to mark for printing.
3.Specify the number of copies. Use Up/Down key on the navigation control to increase/decrease number.
4.Press the Fn/Delete button to toggle between turning on/off the date stamp.
5.Press the OK button to save DPOF settings.
To reset DPOF:
1.Select Reset on the DPOF submenu. A confirmation message appears.
2.Select Yes.
3.Press the OK button to reset DPOF settings.
Radial Blur
The Radial Blur is an effect creates blurs around a point.
To set Radial blur for an image:
1.Use Up/Down key on the navigation control to specify the level of blurs. The adjusting result on preview synchronously while selecting the level.
2.Press the OK button to proceed save options.
3.Available settings are as follow:
•Overwrite. Save and replace the old file with a new one.
•Save As. Save the new file as a new one.
•Cancel. Cancel Radial blur.
55