HP R742 manual Using the Design Gallery Menu, Modifying colors, Adding borders, Modify Color menu

5 Using the Design Gallery Menu

You can use the Design Gallery features to enhance your captured images.

1.While inPlayback, useto scroll to an image, then press .

2.Useto highlight Design Gallery, then press .

3.Useto highlight an option, then pressand follow any on-camera instructions.

Modify Color—Allows you to apply a color effect to an image (see “Modifying colors” on page 22).

Add Borders—Allows you to add a border to an image (see “Adding borders” on page 22).

Rotate—Rotates images in 90-degree increments.

Use to rotate the image clockwise or counter-clockwise in 90-degree increments.

Press to save the image in the new orientation.

Crop—Allows you to crop an image (see “Cropping images” on page 23).

Unless otherwise stated, Design Gallery effects are applied to a copy of the image; the original image is retained.

Modifying colors

TIP: If you plan to modify colors, do so before adding a border.

Modify Color allows you to apply color schemes to the displayed image. To modify colors:

1.While in the Design Gallery Menu, use to select Modify Color, then press

.

2.Use to select a color scheme and preview the effect it has on the image.

•Black & White—Converts color images to black and white.

•Sepia—Converts image to a brownish tone to look old-fashioned.

•B&W Tints—Applies color tones on a black and white version of an image.

3.Press to select the color scheme and display the Modify Color menu. Follow the on-camera instructions to adjust the color.

4.Press to save a copy of the image with the specified color scheme and return to the Design Gallery Menu. Press to exit without saving and return to the

Modify Color menu.

Adding borders

TIP: If you plan to modify colors or crop your image, do so before adding a border.

22 Using the Design Gallery Menu