Plantronics CS545-XD manual Desk Phone plus HL10 Lifter sold separately, Use

Page 13

Desk Phone plus HL10 Lifter (sold separately)

NOTE First follow the steps above for Desk Phone (Standard).

1Firmly press the handset lifter power cord into the handset lifter jack.

2While wearing your headset, slide the handset lifter arm under the handset until the lifter base touches the side of the phone.

3Slide the lifter up to where it nearly touches the handset earpiece.

4Press the call control button on your headset to activate the lifter.

5If you hear a dial tone the lifter is set correctly and needs no adjustment.

6Remove the protective strips from the 3 mounting tapes on the underside of the lifter.

7Gently place the lifter on the desk phone in the pre-determined position.

8Press firmly to adhere.

Image 13

Contents CS545-XD Contents Welcome WelcomeWhat’s in the Box Base overview Base and Headset BasicsSold separately AccessoriesLeft Earloop Assembly Change Headset ConfigurationCustomize Your Headset Headband Assembly Position Your Headset Connect Your Desk Phone Connect the PowerCharge the Headset Desk Phone standard Connect and Configure Your Desk PhoneCheck Configuration and Make a Test Call USE Desk Phone plus HL10 Lifter sold separatelyAdditional Parts if required If You Do Not Hear a Dial ToneDesk Phone plus EHS Cable Position Your Base Headset Controls Your HeadsetTalk Time Charge your second battery BatteryReplace your headset battery Low Battery WarningMuting Your Headset During a Call Adjusting Your Headset VolumeOut of Range Warning Tones Your Base Base Phone Button and Switches Subscription ButtonAutomatic Secure Subscription Manual Over-the-Air SubscriptionPower On/Subscription LED Wideband/Narrowband Audio SwitchAuto Answer Switch Daily Use Conference Up to Three Additional HeadsetsPlace an Outgoing Call Answer an Incoming CallHeadset TroubleshootingDesk Phone Need More HELP?