Chapter 2
Optical zoom
Optical zoom moves the lens between wide angle (1x) and telephoto (3x).
While in 
Picture Capture or 
Video Record, use the buttons on the Zoom lever to control zoom. Press 
to zoom in and 
to zoom out.
NOTE: You can set the optical zoom to the position you want just before recording video clips. However, you cannot use optical zoom while the video clip is recording.
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image quality setting (MP value). As you zoom in, the scene expands to show what the camera will capture, and the MP value decreases to indicate the resolution at which the scene will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image Display is appropriate for the size at which you want to print the captured image. For MP values and their recommended print sizes, see Image Quality under “Using the Picture Capture and Video Record menus” on page 14.
To use digital zoom:
1.While in 
Picture Capture, press 
on the Zoom lever to optically zoom to the maximum level, then release the lever.
2.Press and hold 
until the image you want to capture fills the yellow frame. If you zoom in too far, press 
.
3.To return to optical zoom, press 
.
NOTE: Digital zoom is not available when recording video clips.
12 Taking pictures and recording video clips