HP 812xi manual Changing the TV configuration setting, Changing the language, Exiting setup

Changing the TV configuration setting

This selection sets the format of the video signal for displaying camera images on a television with an optional cable or HP camera dock.

1Select TV Configuration in the Setup menu. The TV Configuration screen appears.

2Using the Up/Down arrows, make one of the following two choices and then press OK.

•NTSC — used primarily in North America and Japan

•PAL — used primarily in Europe

For more information on connecting the camera to a TV, refer to Chapter 5.

Changing the language

This selection sets the language of the menus and text on the camera Display.

1Select Language in the Setup menu. The Language screen appears.

2Using the Up/Down arrows,

select a language and then press OK.

Exiting setup

Selecting EXIT SETUP takes you back to the Main menu.

6-Adjusting camera settings 53