HP 735 /dock Bundle, 733v manual Changing capture modes, Describes these different icons

Changing capture modes

The Mode button on the top of the camera sets the camera to one of nine different capture modes. Each time you press the Mode button, the camera changes to the next capture mode. The sequence for the different settings is: Normal, Self-Timer, Burst, Macro, Action, Landscape, Portrait, F2.6, F4.9, and then repeat.

NOTE These settings do not have any effect on recording video clips unless specifically noted otherwise.

Each time you change the capture mode, an icon representing that capture mode appears in the Status LCD. If Live View is on, the icon also appears in the Image Display. The following table

describes these different icons.

Icon	Setting	Description
None	Normal	Camera automatically selects focus,
		aperture and shutter speed. This is the
		default setting when the camera is first
		turned on.
	Self-Timer	Camera waits 10 seconds after the Video
		button or Shutter button is pressed to take a
		video clip or a picture. See Using self-timer
		mode on page 35.
	Burst	Camera quickly takes multiple still pictures
		(as long as the Shutter button is held down).
		See Using burst mode on page 36.
	Macro	Camera takes extreme close-up pictures.
		See Using macro mode on page 36.

Chapter 2: Taking pictures and recording video clips 33