HP 735 /dock Bundle, 733v manual Using macro mode on, Setup menu

Message	Possible cause	Solution
Focus too close	The focus	Set the camera to Macro
	distance is closer	focus, or if set to Macro
	than the camera	focus, move further away
	can focus.	from the subject. See
		Using macro mode on
		page 36.
Unknown USB	The camera is	Make sure that the camera
device	connected to a	is connected to a
	USB device that it	supported printer or
	does not	computer.
	recognize.
Unable to	There is no	Make sure the cable is
communicate with	connection	connected between the
printer	between the	camera or HP 8886
	camera and	camera dock and the
	printer.	printer. If that does not
		work, turn off the camera
		and disconnect it. Turn the
		printer off and then on
		again. Re-connect the
		camera and turn it on.
	A supported	Make sure the camera is
	printer is either	connected to a supported
	turned off or not	printer and that the printer
	connected to the	is turned on.
	camera.
Selected print size	Print size is larger	Change either print size or
is larger than	than paper size	paper size in the Print
selected paper	in the Print Setup	Setup menu.
size	menu.

Chapter 7: Troubleshooting and support 87