HP 612 manual Wrong, Date and/or, Time is, Shown, Incorrect, Language is, Set on, Red light

Page 61

Problem

Possible cause

Solution

 

 

 

 

The NiMH batteries

You must recharge all four NiMH

 

you are using were

batteries after fully draining them four

 

recharged

times for the batteries to reach their

 

incorrectly.

optimum capacity and performance.

The wrong

The batteries were

date and/or

dead or were

time is

removed from the

shown.

camera for more

 

than 10 minutes.

Replace the batteries and then reset the date and time using the camera menus. To avoid losing date and time information, replace low batteries promptly.

The incorrect

The wrong language

Change the camera language by using

language is

was selected when

the camera’s Setup menu.

set on the

you started the

 

camera.

camera the first

 

 

time.

 

A long delay

The camera is still

occurs after I

saving the last

press the

picture you took.

shutter button

 

before the

 

camera takes

 

a picture.

 

Wait a few seconds for the camera to finish processing the image, and then press the SHUTTER button halfway down. When a steady green light appears next to the viewfinder, the camera is ready to take another picture.

The flash is

Wait until the flash icon on the status

recharging.

LCD stops blinking before taking another

 

flash picture.

The light is low and the flash is turned off.

In dim light the camera requires a longer exposure. Either hold the camera very steady until it takes the picture; or improve the lighting conditions or use the flash.

A red light

Space in memory is

appears next

insufficient for the

to the

picture. (The status

viewfinder

LCD shows “0”

when I press

images remaining.)

the shutter

 

button.

 

Make room in memory by deleting or unloading images, or select a lower image quality setting.

If you do not have a CF memory card installed, installing one will give you room for more images. If you have a CF memory card, remove it and see if you have room in internal memory (the status LCD shows a number other than 0), or install a new CF memory card. For more information, see “Installing a CF memory card” on page 40.

Troubleshooting

53

Page 60 Page 62
Image 61
Page 60 Page 62
Contents Photosmart 612 Digital camera User guide Page User guide Materials disposal Trademark and copyright informationTable of Contents Storing images in memory Appendix a Reference Table of ContentsHP photosmart 612 User Guide Camera parts Getting startedGetting started Tripod mount Image quality Digital zoom Indicator Install the batteries SetupAttach the wrist strap Choose the camera language Using the control dialSet the camera date and time To navigate the menus To review your imagesTo exit a menu without making a selection, select ExitStoring images on a CF memory card Taking a picture Taking picturesTip Taking picturesUnderstanding automatic focus and automatic exposure Previewing your picturesTo preview a picture Using focus lock Using the optical or digital zoomDigital zoom reduces image quality To use the optical zoomDigital zoom works in Preview mode only Using the self-timerTo use the digital zoom To use the self-timer HP photosmart 612 User Guide Managing images on the camera Viewing your imagesCreating a print order To create or edit a print order To delete images Deleting your imagesMagnifying your images Viewing small versions thumbnails of your imagesFormat Memory or Format CF Card if a CF To look at thumbnails of your imagesTo magnify an image Using the flash Adjusting the camera settingsAdjusting the camera settings Icon Message DescriptionRED-EYE To change the flash settingChanging the image quality Image quality Description Resolution PixelsTo change the image quality Changing the date and timeTo change the date and time Changing the camera languageTo change the camera language To change the image on the welcome screen Setting the welcome screenSharing and printing images Sharing and printing imagesSystem requirements for a Windows computer Using the camera with a Windows computerConnecting the camera to a Windows computer Installing the software on a Windows computerTo install the bonus software To connect the camera to a Windows computer Unloading images to a Windows computerTo unload images automatically To use an HP printer that has a memory card slot Using the camera with a Windows NT 4.0 computerTo use a CF memory card reader Changing the PC Connect Mode setting Using the camera with a Macintosh computerSystem requirements for a Macintosh computer Virtual memoryConnecting the camera to a Macintosh computer Installing the software on a Macintosh computerTo connect the camera to a Macintosh computer Unloading images to a Macintosh computerTo automatically unload images to a Macintosh computer Tips for unloading images to a Macintosh computer To unload images to a Windows or Macintosh computer Unloading images without using the camera softwarePrinting images on a printer equipped with a card reader Using a card readerStoring images in memory Storing images in memoryDetermining the number of pictures you can take Using a CF memory card To install a CF memory card Installing a CF memory cardChecking the CF memory card status To copy images from internal memory to a CF memory card CF memory cardTo format internal memory or a CF memory card Formatting memoryHP photosmart 612 User Guide Maintaining your camera Powering your cameraDetermining if the batteries need to be changed Maintaining your cameraWhen the empty-battery icon on the status LCD To insert new batteries Replacing the batteriesTo connect an ac power adapter Using an ac power adapterSupport Camera Caring for your camera and accessoriesMemory cards Safety precautions Problems and solutions TroubleshootingProblem Possible cause Solution Press a Does notButton ReplaceDate and/or WrongTime is ShownHalfway down Too dark My image isToo bright Error Possible cause Solution Message Error messagesCF Card Visiting HP Web sites Getting assistanceVisiting related Web sites HP product support HP photosmart Web siteObtaining support within the United States Contacting HP Customer SupportObtaining support worldwide Upgraded warranty optionsAustralia ArgentinaAustria BelgiumMexico MalaysiaMiddle East/Africa NetherlandsHP product Duration of limited warranty Hewlett-Packard limited warranty statementHardware repair services Appendix a Reference Symbols on the status LCDIcon Meaning Appendix a ReferenceIcon Meaning Indicator light State Meaning Camera indicator lightsCamera specifications Numerics IndexIndex Using AC power adapter 13 when unloading images Batteries 3, 47 bonus software 32 memory card HP photosmart 612 User Guide Location 2 symbols 65 status line Updates for drivers
Related manuals
Manual 84 pages 48.43 Kb Manual 137 pages 39.49 Kb

612 specifications

The HP 612 is a versatile all-in-one printer designed to meet the demands of both home and office environments. This printer offers a compelling combination of features, technologies, and characteristics that enhance productivity and streamline various printing tasks.

One of the standout features of the HP 612 is its printing speed. Capable of producing up to 20 pages per minute for black-and-white documents and around 18 pages per minute for color prints, this printer ensures efficient workflow. The first page out time is impressive, allowing users to quickly access their documents when time is of the essence.

The HP 612 utilizes advanced inkjet technology, which contributes to its high-quality printing results. With a maximum resolution of up to 4800 x 1200 dpi, users can expect vibrant colors and sharp text in every printout. This makes it suitable for a range of applications, from professional documents to high-resolution photos.

In addition to printing, the HP 612 features a comprehensive set of functionalities, including scanning, copying, and faxing. The flatbed scanner allows users to digitize documents quickly and efficiently, while the automatic document feeder (ADF) streamlines the scanning and copying process for multi-page documents. This all-in-one capability is particularly beneficial for busy work environments where space and time are at a premium.

Connectivity is another area where the HP 612 excels. It supports USB, Wi-Fi, and even mobile printing options through popular apps such as HP Smart and Apple AirPrint. This wide range of connectivity options makes it easy for users to print from various devices, including smartphones and tablets, providing flexibility and convenience.

Energy efficiency is an important characteristic of the HP 612. With its ENERGY STAR certification, this printer is designed to consume less power, making it an environmentally friendly choice. Additionally, it features an EcoSmart print mode to help reduce ink and paper usage without compromising print quality.

In summary, the HP 612 is a powerful all-in-one printer that combines speed, quality, and functionality in a compact design. Its advanced technologies and user-friendly features make it an ideal choice for both personal and professional use, delivering reliable performance and exceptional results. Whether for printing important documents or creating stunning photos, the HP 612 proves itself to be a pragmatic solution for a variety of printing needs.
Top Page Image Contents