HP PB360t/PW360t manual Aeb

Self-Timer/Burst Mode

Your camera features a Self-timer and Burst which can be set in the Self-timer/ Burst function. The Self-timer allows you to take photos after a pre-defined delay. While burst lets you take consecutive shots. This function is only available in recording still images. The Self-timer/ Burst setting is automatically set to off when you turn off the camera.

The table below shows the available Self-timer/ Burst settings

Icon		Item	Description
		Off	Captures an image without time delay.
		10 Sec Self-timer	Sets a 10-second delay to capture image after pressing the
	10
			shutter button.
		2 Sec Self-timer	Sets a 2-second delay to capture image after pressing the shutter
	2
			button.
		Burst	Performs continuous shooting when the shutter button is pressed.
			Stops shooting when the shutter button is released.
			Automatic Exposure Bracketing (AEB) captures the same image
		AEB	with three different exposure settings: standard, under, and over
			exposure.
	Hi	Speedy Burst	Continuously captures the same image twelve times.

AF Lamp

The AF Lamp function allows you to record images even in low light conditions.

If the AF Lamp is set to Auto, then the AF lamp located in the front of the camera, see “Front View” on page 1, emits a red light by half pressing the shutter button. This assists the camera to focus more accurately.

AF Lamp

Auto

Off

1/1

31