3.If you are removing an existing card, rotate the blue card ejection lever up, then push the lever in to eject the card from the slot.
4.Insert the new memory card so that the front of the card faces
the front of the camera and the edge with pinholes is placed into the camera first.
5. Gently push the memory card all the way into the camera until it stops. The card ejection lever “pops up” when the card is seated correctly in the slot.
6.Fold the card ejection lever down against the card.
7.Close the memory card door.
Tip: If you cannot close the memory card door, you may not have inserted the
memory card correctly. Remove the memory card and try again.
www.hp.com/photosmart | 69 |