![](/images/new-backgrounds/1151988/15198841x1.webp)
01_LAYOUT_GB
|
| CDRW | ADDITIONALI I | INFOI |
|
|
|
| |||
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| (CONT ) |
| ||
|
|
|
|
|
|
|
| ||||
DIMENSIONS |
|
|
|
|
| ENGLISH |
|
| |||
|
|
|
|
|
| ||||||
| Height: | 41.5 mm (1.64 inch) | |||||||||
|
|
|
| Width: | 146 mm | (5.75 inch) | |||||
|
|
|
| Depth: | 195 mm | (8.11 inch) | |||||
WEIGHT |
| less than 1 kg |
|
|
|
|
| ||||
POWER DISSIPATION | max. 18W |
|
|
|
|
|
| ||||
ENVIRONMENTAL |
|
|
|
|
|
|
|
| |||
Operating temp(1) |
| 5 to 40° C (41 to 104 °F) | |||||||||
Non operating temp |
MEDIA
CERTIFICATION
FCC Compliance: Class B.
UL, CUL listed and CEBEC.
FDA-CDRH.
C-tick
(1) Specifications for the “under pressure” case | (incomming air flow through the | ||
front bezel) | : A flow of at least 2 l/sec. of air at maximum 40 | °, must be realised. | |
This will be achieved by realising at least | |||
between inside the apparatus and outside. |
| ||
Specifications for the “over pressure” case | (outgoing air flow through the front | ||
bezel) | : A flow of at least 2 l/sec. of air at maximum 40 | °, must be realised. This will |
be achieved by realising at least +180 Pascal of pressure difference between inside |
| |
the apparatus and outside. Additionally, the measured temperature of the bottom |
| |
plate of the drive must not exceed 50 | ° C. |
|
Remark: under an environmental temperature of the drive between 5 | ° to 30 ° C no | |
airflow is necessary. |
|
|
15