Toshiba RAV-SP180UT-UL Wireless remote control, Cooling test run, Heating test run

Page 33

4-way Air Discharge Cassette Type

Installation Manual

Wireless remote control

Procedure 1

Turn on the power of the air conditioner. When power is turned on for the first time after installation, it takes approx. 5 minutes until the remote control becomes available. In the case of subsequent power-on, it takes approx. 1 minute until the remote control becomes available. Execute a test run after the predetermined time has passed.

Procedure 2

Push “ON/OFF” button on the remote control, select [COOL] or [HEAT] with “MODE” button, and then select [HIGH] with “FAN” button.

Procedure 3

Cooling test run

Heating test run

 

 

Set the temperature to 64 °F

Set the temperature to 86 °F

(18°C) with the temp. setup

(30°C) with the temp. setup

buttons.

buttons.

Procedure 4

Cooling test run

Heating test run

 

 

After confirming a signal

After confirming a signal

receiving sound “beep”

receiving sound “beep”

immediately set the

immediately set the

temperature to 66 °F (19°C)

temperature to 84 °F (29°C)

with the temp. setup buttons.

with the temp. setup buttons.

Procedure 5

Cooling test run

Heating test run

 

 

After confirming a signal

After confirming a signal

receiving sound “beep”

receiving sound “beep”

immediately set the

immediately set the

temperature to 64 °F (18°C)

temperature to 86 °F (30°C)

with the temp. setup buttons.

with the temp. setup buttons.

Procedure 6

Repeat procedures 4 → 5 → 4 → 5.

Indicators “Operation” (green), “Timer” (green), and “Ready” (orange) in the wireless receiver section flash in approx. 10 seconds, and the air conditioner starts operation. If any of these indicators does not flash, repeat procedures 2 to 5.

Procedure 7

Upon completion of the test run, push “ON/OFF” button to stop operation.

<Overview of test run operations using the wireless remote control>

▼Cooling test run:

ON/OFF → 64 °F (18 °C) → 66 °F (19 °C) → 64 °F (18 °C) → 66 °F (19 °C) → 64 °F (18 °C) → 66 °F (19 °C)

→64 °F (18 °C) → (test run) → ON/OFF

▼Heating test run:

ON/OFF → 86 °F (30 °C) → 84 °F (29 °C) → 86 °F (30 °C) → 84 °F (29 °C) → 86 °F (30 °C) → 84 °F (29 °C)

→86 °F (30 °C) → (test run) → ON/OFF

Always select

 

[HIGH] fan

 

speed.

3, 4,

2

2

5, 6

2,7

 

EN

– 32 –

32-EN

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Installation Manual Contents „ Accessory parts Accessory Parts„ Separate sold parts Part name ’ty Shape UsagePrecautions for Safety Way Air Discharge Cassette Type Avoid installing in the following places Selection of Installation Place„ Selection of installation place „ Installation spaceAdvice Model RAVModel RAV Possible installed ceiling height Height list of ceiling possible to be installed„Ceiling height Unit ft m„ Discharge direction Installation „External viewUnit in mm „ Opening a ceiling and installation of hanging bolts Cushion may damage the fan motor „ Installation of ceiling panel Sold separately „ Installation of remote control Sold separately„ Wireless remote control „ Piping/Heat insulating material Drain Piping Work„ Flexible hose Piping„ Connecting drain pipe „ Drain up„ Check the draining „ Perform heat insulating „ Refrigerant Piping Refrigerant Piping and Evacuating„Pipe size „Permissible Piping Length and Height Difference„ Evacuation Union Pipe Accessory Remote control wiring WiringElectrical Connection Thermal insulation to wiring connecting port „ Wire connection„ Wiring on the ceiling panel „ System interconnection wires and ground wire„ Remote Control Wiring „ Wiring diagram„ Changing applicable control setting ProcedureApplicable Controls „ Installing indoor unit on high ceiling „ Using wireless remote controlRestore the factory default Setup data SW501-1 SW501-2„ Filter sign setting „ To secure better effect of heating„ Horizontal louver direction Swing setup code Swing of louvers „ Swing mode„ Power saving mode „ Cancel louver lockSetting data 0002 0003 0004 „ Louver lock No swingOutdoor unit data „ Remote control switch monitoring functionCode No Data name Indoor unit dataProcedure example Group control for system of multiple unitsGroup control in single system 29-EN 30-EN Test RUN Wired remote control„ Before test run „ Execute a test runCooling test run Wireless remote controlHeating test run Cooling test run Heating test run10TROUBLESHOOTING „ Confirmation of error history„ Confirmation and check IPDU-CDB „ Check codes and parts to be checked35-EN 36-EN EH99864701

RAV-SP180UT-UL specifications

The Toshiba RAV-SP180UT-UL is a cutting-edge commercial air conditioning unit designed to deliver exceptional cooling and heating performance. As part of Toshiba's advanced lineup of air conditioning systems, this model caters to diverse applications such as offices, retail spaces, and other commercial environments, ensuring comfortable conditions year-round.

One of the standout features of the RAV-SP180UT-UL is its powerful inverter technology. This technology enables the unit to adjust its cooling or heating output based on the current load requirements, resulting in significant energy savings and improved efficiency compared to conventional systems. It operates with a high Seasonal Energy Efficiency Ratio (SEER) and a Heating Seasonal Performance Factor (HSPF), making it an environmentally friendly choice for businesses seeking to reduce their carbon footprint.

Another key characteristic of the RAV-SP180UT-UL is its ultra-quiet operation. The unit is designed to minimize noise levels, providing a serene indoor environment that is ideal for workplaces and customer-facing areas. This low-noise performance is achieved through advanced fan engineering and acoustic insulation, ensuring that disruptions to work or leisure activities are kept to a minimum.

The RAV-SP180UT-UL also features flexible installation options, allowing for wall-mounted or ceiling-mounted configurations to suit various spatial requirements. Its compact design means that it can be installed in tight spaces without compromising on performance or aesthetics. The unit is equipped with a remote control for added convenience, enabling users to easily adjust settings, set timers, and switch between modes.

Moreover, the Toshiba RAV-SP180UT-UL is built with durability in mind. It utilizes high-quality materials and components that ensure long-lasting performance, even in demanding environments. The unit is also equipped with advanced filtration systems that enhance indoor air quality by removing dust, allergens, and other contaminants, contributing to a healthier workplace.

In summary, the Toshiba RAV-SP180UT-UL is a reliable and efficient solution for commercial air conditioning needs. Its inverter technology, quiet operation, flexible installation, and emphasis on durability make it a compelling choice for businesses looking to enhance comfort while maintaining energy efficiency. Whether for heating or cooling, this unit delivers consistent performance that meets the demands of modern commercial settings.
Top Page Image Contents